[rbak-nsp] maximum-links must be 2 for access type link-group with current PPA card

[Łukasz Kopiszka]

W dniu 14.04.2015 o 14:11, Olivier Benghozi pisze:
> Hi,
>
> For access link-groups (neither ether nor dot1q link-groups), no more than 2 links for "GE3, GE1020, 10GE".
> It's documented at "maximum-links".
Thx I must read again manual :)
>
> Olivier
>
>> Le 14 avr. 2015 à 09:34, Voigt, Thomas <Thomas.Voigt at netkom.de> a écrit :
>>
>> Hi,
>>
>> Lukasz Kopiszka wrote:
>>
>>> When I try assign link-group "link-group-test" I got error:
>>> % maximum-links must be 2 for access type link-group with current PPA
>>> card
>>>
>>> Any solution how to fix it?
>>>
>>> Problem is on SE100 with SEOS 6... and SE600 with SEOS 12...
>> Maybe it's an hardware problem because of an old card with an old PPA chip.
>>
>> We are using cards with PPA2 and PPA3 here. There was never a problem with more than 2 ports in a link-group.
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp

-- 
Pozdrawiam,
Łukasz Kopiszka
www.alfa-system.pl