[rbak-nsp] problem traffic with one slot

[Dmitry]

Hello, all!

I have problem with  session in card 10ge-4-port 1, session is up, but 
traffic no transmit to subscriber.


card 10ge-4-port 1
!
port ethernet 1/1
  link-dampening up 0 down 2000
  no shutdown
  link-group uplink
!
port ethernet 1/4
  link-dampening up 0 down 2000
  no shutdown
  bind interface if_ipoe_2 ipoe
  service clips auto-detect context ipoe service-policy POL_CLIPS_ipoe
!
card 10ge-4-port 3
!
port ethernet 3/1
  link-dampening up 0 down 2000
  no shutdown
  link-group uplink
!
port ethernet 3/4
  link-dampening up 0 down 2000
  no shutdown
  bind interface if_ipoe ipoe
  service clips auto-detect context ipoe service-policy POL_CLIPS_ipoe
!

Routing

[ipoe]Redback#sho configuration | include route
  ip route 0.0.0.0/0 176.115.136.25
  ip route 10.90.0.0/17 10.80.1.1
  ip route 10.90.128.0/17 10.80.1.1
  ip route 10.90.230.0/24 10.80.1.17
  ip route 176.115.139.0/24 10.80.1.1
  ip route 192.168.2.0/23 10.80.1.1

Session is up

[ipoe]Redback#sho subscribers active username 10.90.230.3
10.90.230.3
         Session state Up
         Circuit   1/4 clips 314532
         Internal Circuit   1/4:511:63:31/13/2/55000
         Interface bound  if_ipoe_multi2
         Current port-limit unlimited
         Protocol Stack IPV4
         ip address 10.90.230.3 (applied)
         acct-interim-interval 600 (applied)
         nat policy-name policy_176.115.138.78 (applied)
         qos-policing-policy DEFAULT-IN (applied from sub_default)
         qos-metering-policy DEFAULT-OUT (applied from sub_default)
         qos-dynamic-param  (applied)
            police-class-rate cls-all rate-absolute 37888 (applied)
            police-class-burst cls-all 4736000 (applied)
            police-class-excess-burst cls-all 7104000 (applied)
            meter-class-rate cls-all rate-absolute 37888 (applied)
            meter-class-burst cls-all 4736000 (applied)
            meter-class-excess-burst cls-all 7104000 (applied)
[ipoe]Redback#Session timed out after 10 minutes of inactivity.

Route show to port 1/4

[ipoe]Redback#sho ip route 10.90.230.10
     Longest match Routing entry for 10.90.230.10/32 is 10.90.230.0/24 , 
version: 85463
     Route Uptime: 00:30:58
     Paths: total 1, best path count 1

     Route has been downloaded to following slots
       iPPA: 01 03

     Path information :

       Active path :
        Known via static, distance 1, metric 0,
       Tag 0, Next-hop 10.80.1.17, NH-ID 0x31100008, Adj ID: slot 
number=0, adj id=0x4, Interface if_ipoe_2
       Circuit 1/4:511:63:31/1/1/7
       External Circuit :  1/4

Counters transmit is 0!!

[ipoe]Redback#sho circuit counters username 10.90.230.3 detail
Circuit: 1/4 clips 314532, Internal id: 13/2/55000, Encap: ether-clips
  Packets Bytes
-------------------------------------------------------------------------------
  Receive         :                 1895  Receive :               193272
  Receive/Second  :                 0.50  Receive/Second 
:                34.50
  Transmit        :                    5  Transmit :                  390
  Xmits/Queue Xmits/Queue
    0             :                    5    0 :                  390
    1             :                    0    1 :                    0
    2             :                    0    2 :                    0
    3             :                    0    3 :                    0
    4             :                    0    4 :                    0
    5             :                    0    5 :                    0
    6             :                    0    6 :                    0
    7             :                    0    7 :                    0
  Xmit Q Deleted  :                    0  Xmit Q Deleted 
:                    0
  Transmit/Second :                 0.00  Transmit/Second 
:                 0.00


But this command show that destination card is 3, but should be 1


[local]Redback#sho destination card 10.90.230.3

Destination address will be dispatched to slot 3.
(2nd active card from left, out of total 2 active cards).
[local]Redback#cont

What could be the problem????

Thanks!!!