[rbak-nsp] VRRP on link-group interface does not work

[Alex D.]

Is someone here who can shed light into the dark ?
Regards,
Alex

Am 11.02.2020 21:36, schrieb Alex D.:
> Hi,
>
> we are running SEOS-12.1.1.9p3 on a Smartedge 600. I just configured a
> link-group for termination of PPPoE users which works fine. For
> redundancy purposes, we have a 2nd SE600 and use VRRP tracking for
> switch over in case of a link down. Now i tried also configuring VRRP on
> the LAG interface which does not seem to work, both routers remain in
> "backup" state though a direkt L2 connection between them exists.
> Is VRRP supported on link-groups at all ???
>
> This works (tracking configuration ommitted)
> ------------------------------------------------------------------------
> port ethernet 1/5
>  no shutdown
>  encapsulation dot1q
>  dot1q pvc 15
>   bind interface VRRP-1/5 local
>  dot1q pvc 57 encapsulation pppoe
>   description PPPoE xxx
>   bind authentication pap chap maximum 1500
>
> interface VRRP-1/5
>   ip address 10.1.5.1/29
>   vrrp 1 backup
>    virtual-address 10.1.5.3
>    advertise-interval millisecond 300
>    priority 200
>    preempt hold-time 10
>
>   --- VRRP Virtual Router VRRP-1/5/1 (Backup) ---
>
> State             : Master            Last Event        : Preempt Hold
> Timeout
> Priority          : 200               Fast Adv Int (ms) : 300
> Last Adv Source   : 10.1.5.2          Up Time           : 247w 0d
> 14:58:23
> Preempt           : Yes               Master Down  (ms) : 900
> Preempt HT (sec)  : 10                Skew Time (u-sec) : 0
> Auth Type:        : None              Key Chain         :
> Connected Route   : No
> Address List:
> 10.1.5.3
> Track Interface List:
>
>
> This does not work
> ----------------------------------------------------------------------------
>
> link-group PPPOE-LAG-1 access
>  encapsulation dot1q
>  maximum-links 2
>  lacp active
>  dot1q pvc 25
>   description VRRP xxxx
>   bind interface VRRP-Link-1 local
>  dot1q pvc 145 encapsulation pppoe
>   description PPPoE location xxx
>   bind authentication pap chap maximum 1500
>
>  interface VRRP-Link-1
>   ip address 10.2.5.1/29
>   vrrp 1 backup
>    virtual-address 10.2.5.3
>    advertise-interval millisecond 300
>    priority 200
>    preempt hold-time 10
>
>   --- VRRP Virtual Router VRRP-Link-1/1 (Backup) ---
>
> State             : Backup            Last Event        : Interface Up
> Priority          : 200               Fast Adv Int (ms) : 300
> Last Adv Source   : 0.0.0.0           Up Time           : 11w 5d 16:52:33
> Preempt           : Yes               Master Down  (ms) : 900
> Preempt HT (sec)  : 10                Skew Time (u-sec) : 0
> Auth Type:        : None              Key Chain         :
> Connected Route   : No
> Address List:
> 10.2.5.3
>
>
> Regards,
> Alex
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp
>