[rbak-nsp] VRRP on link-group interface does not work

[Johan Mulder]

Although I have no sources to confirm this, if I'm not mistaken the VRRP
configuration is not supported when using link groups.

On Sat, Feb 29, 2020 at 11:47 PM Alex D. <listensammler at gmx.de> wrote:

> Is someone here who can shed light into the dark ?
> Regards,
> Alex
>
> Am 11.02.2020 21:36, schrieb Alex D.:
> > Hi,
> >
> > we are running SEOS-12.1.1.9p3 on a Smartedge 600. I just configured a
> > link-group for termination of PPPoE users which works fine. For
> > redundancy purposes, we have a 2nd SE600 and use VRRP tracking for
> > switch over in case of a link down. Now i tried also configuring VRRP on
> > the LAG interface which does not seem to work, both routers remain in
> > "backup" state though a direkt L2 connection between them exists.
> > Is VRRP supported on link-groups at all ???
> >
> > This works (tracking configuration ommitted)
> > ------------------------------------------------------------------------
> > port ethernet 1/5
> >  no shutdown
> >  encapsulation dot1q
> >  dot1q pvc 15
> >   bind interface VRRP-1/5 local
> >  dot1q pvc 57 encapsulation pppoe
> >   description PPPoE xxx
> >   bind authentication pap chap maximum 1500
> >
> > interface VRRP-1/5
> >   ip address 10.1.5.1/29
> >   vrrp 1 backup
> >    virtual-address 10.1.5.3
> >    advertise-interval millisecond 300
> >    priority 200
> >    preempt hold-time 10
> >
> >   --- VRRP Virtual Router VRRP-1/5/1 (Backup) ---
> >
> > State             : Master            Last Event        : Preempt Hold
> > Timeout
> > Priority          : 200               Fast Adv Int (ms) : 300
> > Last Adv Source   : 10.1.5.2          Up Time           : 247w 0d
> > 14:58:23
> > Preempt           : Yes               Master Down  (ms) : 900
> > Preempt HT (sec)  : 10                Skew Time (u-sec) : 0
> > Auth Type:        : None              Key Chain         :
> > Connected Route   : No
> > Address List:
> > 10.1.5.3
> > Track Interface List:
> >
> >
> > This does not work
> >
> ----------------------------------------------------------------------------
> >
> > link-group PPPOE-LAG-1 access
> >  encapsulation dot1q
> >  maximum-links 2
> >  lacp active
> >  dot1q pvc 25
> >   description VRRP xxxx
> >   bind interface VRRP-Link-1 local
> >  dot1q pvc 145 encapsulation pppoe
> >   description PPPoE location xxx
> >   bind authentication pap chap maximum 1500
> >
> >  interface VRRP-Link-1
> >   ip address 10.2.5.1/29
> >   vrrp 1 backup
> >    virtual-address 10.2.5.3
> >    advertise-interval millisecond 300
> >    priority 200
> >    preempt hold-time 10
> >
> >   --- VRRP Virtual Router VRRP-Link-1/1 (Backup) ---
> >
> > State             : Backup            Last Event        : Interface Up
> > Priority          : 200               Fast Adv Int (ms) : 300
> > Last Adv Source   : 0.0.0.0           Up Time           : 11w 5d 16:52:33
> > Preempt           : Yes               Master Down  (ms) : 900
> > Preempt HT (sec)  : 10                Skew Time (u-sec) : 0
> > Auth Type:        : None              Key Chain         :
> > Connected Route   : No
> > Address List:
> > 10.2.5.3
> >
> >
> > Regards,
> > Alex
> > _______________________________________________
> > redback-nsp mailing list
> > redback-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/redback-nsp
> >
>
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp
>


-- 
Johan Mulder
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20200309/9814ea5f/attachment.htm>