Hi Frans!<br><br>Here is what I am actually trying to achieve:<br><br>1. I have a DATA service in VLAN x<br>2. I have a Voice service in VLAN y<br><br>The BRAS acts as a DHCP server in this setup and I have one DHCP pool per service. I want all PCs to be binded to the DATA service and all voice CPE's to be binded to the Voice service. One solution would be (I've successfully tested it) to match by OUI in the MAC address and to associate it with a particular multibind interface by sending the "IP-Interface" Radius attribute. Then the request will be served by the appropriate DHCP pool. But what if the MAC addresses of my Voice CPE are not the same. The best solution would be to match the request by incoming VLAN id. Then I wouldn't need a Radius server or any static config per subscriber.<br>
<br><br>Thank you!<br><br>Regards,<br>V.Vasilev<br><br><div class="gmail_quote">On Tue, Mar 9, 2010 at 11:33 AM, Frans Legdeur <span dir="ltr"><<a href="mailto:frans@falco-networks.com">frans@falco-networks.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
<div>
<font face="Calibri, Verdana, Helvetica, Arial"><span style="font-size: 11pt;">Hi Vladislav,<br>
<br>
That would be easy, if the subscribers IP address is matching the IP range of your multibind interface, the binding will be done for you:<br>
Either, in case of DHCP, you can mention the name of the interface, or you assign the IP address in which case the matching interface will be found automatically.<br>
<br>
Do you use radius or all by straight config?<br>
<br>
<br>
Kind regards,<br>
<br>
<br>
Frans.<br>
<br>
<br>
<br>
<hr align="CENTER" width="95%" size="3"><b>From: </b>Vladislav Vasilev <<a href="http://vvasilev@vvasilev.net" target="_blank">vvasilev@vvasilev.net</a>><br>
<b>Date: </b>Tue, 9 Mar 2010 11:00:08 +0000<br>
<b>To: </b><<a href="http://redback-nsp@puck.nether.net" target="_blank">redback-nsp@puck.nether.net</a>><br>
<b>Subject: </b>[rbak-nsp] binding to a multibind interfaces<div><div></div><div class="h5"><br>
<br>
Hello!<br>
<br>
I've got a SE 1200. Does anyone know how I can bind subscribers to a particular multibind interface based on an incoming VLAN id? Is it possible at all?<br>
<br>
<br>
Thanks!<br>
<br>
Regards,<br>
V.Vasilev<br>
<br>
</div></div><hr align="CENTER" width="95%" size="3"></span></font><font face="Monaco, Courier New"><span style="font-size: 12pt;">_______________________________________________<br>
redback-nsp mailing list<br>
<a href="http://redback-nsp@puck.nether.net" target="_blank">redback-nsp@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/redback-nsp" target="_blank">https://puck.nether.net/mailman/listinfo/redback-nsp</a><br>
</span></font>
</div>
</blockquote></div><br>