<div>Hi.</div><div><br></div>If you didn't have support contract, you can replace faulty flash and upload SEOS to XCRP3 without any RMA procedure. Just use same size flash and follow the instruction in troubleshooting guide.<br>
<br><div class="gmail_quote">On Mon, Aug 9, 2010 at 2:09 PM, Tanan Satayapiwat <span dir="ltr"><<a href="mailto:tanan.satayapiwat@ericsson.com">tanan.satayapiwat@ericsson.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
<div>
<div dir="ltr" align="left"><font face="Arial" color="#0000ff" size="2"><span>"<font face="Times New Roman" color="#000000" size="3">Compact Flash Test : FAILED"</font></span></font></div>
<div><font face="Arial" color="#0000ff" size="2"></font> </div>
<div><span><font face="Arial" color="#0000ff" size="2">Definitely need a replacement. Note that this is internal compact flash
so it's not field-replacable.</font></span></div>
<div><span><font face="Arial" color="#0000ff" size="2"></font></span> </div>
<div><font face="Arial" color="#0000ff" size="2"><span>Tanan</span></font></div>
<div><br></div>
<div lang="en-us" dir="ltr" align="left">
<hr>
<font face="Tahoma" size="2"><div class="im"><b>From:</b> Navin Nepali [mailto:<a href="mailto:navin_n@yahoo.com" target="_blank">navin_n@yahoo.com</a>]
<br></div><b>Sent:</b> Monday, August 09, 2010 12:06 PM<br><b>To:</b> Tanan
Satayapiwat<div class="im"><br><b>Subject:</b> RE: [rbak-nsp] Help me to indentify this
problem!<br></div></font><br></div>
<div></div>
<table cellspacing="0" cellpadding="0" border="0">
<tbody>
<tr>
<td valign="top">
<div>Ok Tanan..i got some log now.</div>
<div> </div>
<div>[0]Booting(2)....<br>Enabling L1/L2 Caches...</div>
<div>Reset Cause:<br> Power On
Reset (PPC/TDM Subsystems)</div>
<div><br>Cold boot, clearing out vxWorks memory space<br>SCC RAM
controller Initialized<br>PPC1: Initialized PPC1<br>Detected Peer XC-RP,
will try to establish link....<br>PPC1: Polling for commands from
PPC0<br>Monitor 0 channel 1 Voltage is 1.511 V (9AC0)<br>Monitor 0 channel
2 Voltage is 1.787 V (B700)<br>Monitor 1 channel 1 Voltage is 5.028 V
(80C0)<br>Monitor 1 channel 2 Voltage is 3.348 V (AB80)<br>Monitor 1
channel 3 Voltage is 2.524 V (8140)<br>Monitor 1 channel 4 Voltage is
2.109 V (D800)<br>Monitor 0 Temp = 40.00 C (2800)<br>Monitor 1 Temp =
28.50 C (1C80)<br>ATA device not present or not responding<br>Reading MAC
address <br>Backplane EEPROM MAC address 00:30:88:01:FA:4C<br>Welcome to
SmartFirmware(tm) for Redback PowerPC Copyright (c) 1999-2005 by Redback
Networks, Inc. version 1.0b1272<br>SmartFirmware(tm) Copyright 1996-2000
by CodeGen, Inc.<br>All Rights Reserved.<br>Executing
POST<br>
PPC0 L2 Cache Test :
PASSED<br>
Sandisk Screen Test :
PASSED<br>
Bridge Test :
PASSED<br>
PPC SDRAM Test :
PASSED<br>
SCC SDRAM Test :
PASSED<br>
Serial(16552) Test :
PASSED<br>
Ethernet Test :
PASSED<br>
ISA Bridge Test :
PASSED<br>
Forte Test :
PASSED<br>
Opus Test :
PASSED<br>
Max Test :
PASSED<br>
Bits Test :
PASSED<br>
SCC Test :
PASSED<br>
Compact Flash Test :
FAILED<br>
PC Card Test : PASSED<br>FAILED (1 error) Loop 1 of 1, 2010/08/09
09:51:21<br>POST FAILED<br>Auto-boot in 0 seconds - press se* to abort,
CR-CR to boot: <br>inflating
image from 7050959 bytes to <br>Flushing L1 D-Cache, @ 0x10000, 40591497
bytes <br>PPC1: PPC1 image loaded @0x10000<br>error: error while trying to
load or boot<br>ok CR-CR<br>no such symbol "CR-CR"<br>error: undefined
word<br>ok se*<br>no such symbol "se*"<br>error: undefined word<br>ok
<br>ok <br>ok <br>ok <br>[0]Booting(2)....<br>Enabling L1/L2
Caches...</div>
<div>Reset Cause:<br> Power On
Reset (PPC/TDM Subsystems)</div>
<div><br>Cold boot, clearing out vxWorks memory space<br>SCC RAM
controller Initialized<br>PPC1: Initialized PPC1<br>Detected Peer XC-RP,
will try to establish link....<br>PPC1: Polling for commands from
PPC0<br>Monitor 0 channel 1 Voltage is 1.513 V (9B00)<br>Monitor 0 channel
2 Voltage is 1.787 V (B700)<br>Monitor 1 channel 1 Voltage is 9.988 V
(FFC0)<br>Monitor 1 channel 2 Voltage is 4.994 V (FFC0)<br>Monitor 1
channel 3 Voltage is 4.994 V (FFC0)<br>Monitor 1 channel 4 Voltage is
2.497 V (FFC0)<br>Monitor 0 Temp = 39.75 C (27C0)<br>Monitor 1 Temp =
0.-25 C (FFFFFFC0)<br>ATA device not present or not responding<br>Reading
MAC address <br>Backplane EEPROM MAC address 00:30:88:01:FA:4C<br>Welcome
to SmartFirmware(tm) for Redback PowerPC Copyright (c) 1999-2005 by
Redback Networks, Inc. version 1.0b1272<br>SmartFirmware(tm) Copyright
1996-2000 by CodeGen, Inc.<br>All Rights Reserved.<br>Executing
POST<br>
PPC0 L2 Cache Test :
PASSED<br>
Sandisk Screen Test :
PASSED<br>
Bridge Test :
PASSED<br>
PPC SDRAM Test :
PASSED<br>
SCC SDRAM Test :
PASSED<br>
Serial(16552) Test :
PASSED<br>
Ethernet Test :
PASSED<br>
ISA Bridge Test :
PASSED<br>
Forte Test :
PASSED<br>
Opus Test :
PASSED<br>
Max Test :
PASSED<br>
Bits Test :
PASSED<br>
SCC Test :
PASSED<br>
Compact Flash Test :
FAILED<br>
PC Card Test : PASSED<br>FAILED (1 error) Loop 1 of 1, 2010/08/09
09:54:37<br>POST FAILED<br>Auto-boot in 0 seconds - press se* to abort,
CR-CR to boot: <br>inflating
image from 7050959 bytes to <br>Flushing L1 D-Cache, @ 0x10000, 40591497
bytes <br>PPC1: PPC1 image loaded @0x10000<br>error: error while trying to
load or boot</div>
<div> </div>
<div> </div>
<div>Seems like Compact Flash card is not working.</div>
<div> </div>
<div>So how to replace it?</div></td></tr></tbody></table></div></blockquote></div><br clear="all"><br>-- <br>WBR, Yuri<br>