ok 
ok 
ok  
ok 
ok 
Ęk reset
[0]Booting(2)....
Enabling L1/L2 Caches...

Reset Cause:
        SCC Watchdog Reset (PPC Subsystem ONLY)
        ISA reset (PPC Subsystem ONLY)


Cold boot, clearing out vxWorks memory space
Writing SCC Reset into 0x04EBFFE8
SCC RAM controller Initialized
Detected Peer XC-RP, will try to establish link....
PPC1: Initialized PPC1
Monitor 0 channel 1 Voltage is 1.513 V (9B00)
PPC1: Polling for commands from PPC0
Monitor 0 channel 2 Voltage is 1.784 V (B6C0)
Monitor 1 channel 1 Voltage is 5.028 V (80C0)
Monitor 1 channel 2 Voltage is 3.348 V (AB80)
Monitor 1 channel 3 Voltage is 2.524 V (8140)
Monitor 1 channel 4 Voltage is 2.119 V (D900)
Monitor 0 Temp = 32.75 C (20C0)
Monitor 1 Temp = 23.50 C (1780)
Reading MAC address 
Backplane EEPROM MAC address 00:30:88:01:FA:4C
Welcome to SmartFirmware(tm) for Redback PowerPC Copyright (c) 1999-2005 by Redback Networks, Inc. version 1.0b1272
SmartFirmware(tm) Copyright 1996-2000 by CodeGen, Inc.
All Rights Reserved.
Executing POST
                           PPC0 L2 Cache Test : PASSED
                          Sandisk Screen Test : PASSED
                                  Bridge Test : PASSED
                               PPC SDRAM Test : PASSED
                               SCC SDRAM Test : PASSED
                           Serial(16552) Test : PASSED
                                Ethernet Test : PASSED
                              ISA Bridge Test : PASSED
                                   Forte Test : PASSED
                                    Opus Test : PASSED
                                     Max Test : PASSED
                                    Bits Test : PASSED
                                     SCC Test : PASSED
                           Compact Flash Test : PASSED
                                 PC Card Test : PASSED
PASSED Loop 1 of 1,  2010/08/10 08:27:59
POST PASSED
ok printenv
Variable              Value                       (Default Value)
------------------------------------------------------------------------------
vx-config-flags       0x0                         (0x0)
vx-other              0x7a                        (0x7a)
vx-startup-script                                 ()
vx-target-name                                    ()
vx-host-name                                      ()
verbose-output?       true                        (true)
ignore-cfgfile?       false                       (false)
update-ofw?           false                       (false)
user-auth?            true                        (true)
gateway-ip-addr                                   ()
server-ip-addr        192.168.12.5                ()
ip-addr               192.168.12.1:255.255.255.0  ()
mac_addr              00:30:88:00:00:50           (00:30:88:00:00:50)
fcode-debug?          false                       (false)
load-base             0x05600000                  (0x05600000)
virt-size             -1                          (-1)
virt-base             -1                          (-1)
real-size             0x00080000                  (0x00080000)
real-base             0x00000000                  (0x00000000)
real-mode?            true                        (true)
little-endian?        false                       (false)
inverse-video?        true                        (true)
oem-banner            Welcome to SmartEdge from Redback Networks (Welcome to SmartEdge from Redback Networks)
oem-banner?           false                       (false)
oem-logo?             false                       (false)
screen-#rows          24                          (24)
screen-#columns       80                          (80)
output-device         screen                      (screen)
input-device          keyboard                    (keyboard)
use-nvramrc?          true                        (true)
nvramrc
    1: devalias screen /failsafe
    2: devalias keyboard /failsafe
    3: devalias net /pci/ethernet
    4: devalias flash /pci/isa/ide/disk@0,0
    5: devalias nbflash /pci/isa/ide/disk@1,1
    6: devalias hd /pci/isa/ide/disk@1,0
    7: probe-all install-console banner
secondary-diag?       true                        (true)
secondary-diag-mode   0x0                         (0x0)
diag-switch?          false                       (false)
diag-file             diag                        (diag)
diag-device           net                         (net)
boot-file-ppc1        /p01/vxWorks.gz             (/p01/vxWorks.gz)
boot-file-ppc0        /p01/netbsd                 (/p01/netbsd)
boot-device           flash                       (flash)
boot-command          bootsys                     (bootsys)
auto-boot-timeout     5000                        (5000)
auto-boot?            false                       (false)
ok  
ok 
ok