<HTML><HEAD></HEAD>
<BODY dir=ltr>
<DIV dir=ltr>
<DIV style="FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: 12pt">
<DIV>Hello Mickael</DIV>
<DIV> </DIV>
<DIV>Thanks for the config.</DIV>
<DIV>this configuration is working well like any cisco or juniper router as the
SE is configured as a router.</DIV>
<DIV>But I would like to provide Mcast on subscriber PPPoE session. So just by
adding following command on your configuration, it seems not working for
subscriber subs1 once connected.</DIV>
<DIV>Do i miss something or do i have to change approach?</DIV>
<DIV> </DIV>
<DIV>Jacques </DIV>
<DIV>....</DIV>
<DIV>!</DIV>
<DIV>interface ToDSL multibind</DIV>
<DIV>ip address 172.20.1.1/23</DIV>
<DIV>ip pool 172.20.1.0/23</DIV>
<DIV>pim sparse-mode passive</DIV>
<DIV>!</DIV>
<DIV>subscriber name subs1</DIV>
<DIV>password xxxx</DIV>
<DIV>ip address pool</DIV>
<DIV>!</DIV>
<DIV>port ethernet 14/1</DIV>
<DIV>encapsulation pppoe</DIV>
<DIV>bind authentication chap pap</DIV>
<DIV>!</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>Jacques</DIV></DIV></DIV></BODY></HTML>