<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;"><DIV>Currently there is no configuration in 10G card.. i switched back to old configuration.</DIV>
<DIV><BR><BR>--- On <B>Tue, 12/7/10, Yuri Shefer <I><shefys@gmail.com></I></B> wrote:<BR></DIV>
<BLOCKQUOTE style="BORDER-LEFT: rgb(16,16,255) 2px solid; PADDING-LEFT: 5px; MARGIN-LEFT: 5px"><BR>From: Yuri Shefer <shefys@gmail.com><BR>Subject: Re: [rbak-nsp] Problem with the 10G traffic card in SE800<BR>To: "Navin Nepali" <navin_n@yahoo.com><BR>Cc: redback-nsp@puck.nether.net<BR>Date: Tuesday, December 7, 2010, 2:10 PM<BR><BR>
<DIV class=plainMail>Show output from this commands:<BR><BR>show configuration card 3<BR>show circuit 3/1 summary<BR><BR>On Tue, Dec 7, 2010 at 11:27 AM, Navin Nepali <<A href="http://us.mc1127.mail.yahoo.com/mc/compose?to=navin_n@yahoo.com" ymailto="mailto:navin_n@yahoo.com">navin_n@yahoo.com</A>> wrote:<BR>><BR>> Version:<BR>> Redback Networks SmartEdge OS Version SEOS-6.2.1.2-Release<BR>> Built by sysbuild@SWB-node14 Fri Jan 29 16:06:29 PST 2010<BR>> Copyright (C) 1998-2010, Redback Networks Inc. All rights reserved.<BR>> System Bootstrap version is PowerPC,1.0b1272<BR>> Installed minikernel version is 23<BR>> Router Up Time - 21 hours 22 minutes 34 secs<BR>><BR>> [ntc]NT-SE800#show chassis<BR>> Current platform is SE800e<BR>> (Flags:<BR>> A-Active Crossconnect B-Standby Crossconnect C-SARC Ready<BR>>
D-Default Traffic Card E-EPPA Ready G-Upgrading FPGA<BR>> H-Card Admin State SHUT I-IPPA Ready M-FPGA Upgrade Required<BR>> N-SONET EU Enabled O-Card Admin State ODD P-Coprocessor Ready<BR>> P1-ASP1 Ready P2-ASP2 Ready R-Traffic Card Ready<BR>> S-SPPA Ready U-Card PPAs/ASP UP W-Warm Reboot<BR>> X-XCRP mismatch)<BR>> Slot:
Configured-type Slot: Installed-type Initialized Flags<BR>> -------------------------------------------------------------------------------<BR>> 1 : none 1 : none No<BR>> 2 : none 2 : none No<BR>> 3 :
10ge-1-port 3 : 10ge-1-port Yes IEUDR<BR>> 4 : none 4 : none No<BR>> 5 : ge3-4-port 5 : ge3-4-port Yes IEUR<BR>> 6 : ge3-4-port 6 :
ge3-4-port Yes IEUR<BR>> 7 : xcrp 7 : xcrp Yes A<BR>> 8 : xcrp 8 : xcrp Yes B<BR>> 9 : none 9 :
none No<BR>> 10 : ether-12-port 10 : ether-12-port Yes IEUR<BR>> 11 : none 11 : none No<BR>> 12 : none 12 : none No<BR>> 13 :
none 13 : none No<BR>> 14 : none 14 : none No<BR>> [ntc]NT-SE800#<BR>> [ntc]NT-SE800#<BR>><BR>> [ntc]NT-SE800#show hardware<BR>><BR>> Fan Tray Status Present<BR>> Fan(s) Status Normal<BR>> Power Supply A Status Normal<BR>> Power Supply B
Status Normal<BR>> Active Alarms NONE<BR>><BR>><BR>> Slot Type Serial No Rev Ver Mfg Date Voltage Temp<BR>> ---- -------------------- -------------- --- --- ----------- -------- -------<BR>> N/A backplane 8Y044010602694 4 4 27-JUN-2006 N/A N/A<BR>> N/A fan tray 9W034030602491 3 4 27-JUN-2006 N/A N/A<BR>> 3 10ge-1-port A825G2410G0PAH 25
4 09-JUL-2010 OK NORMAL<BR>> 5 ge3-4-port A620D250720352 20 4 23-JUN-2007 OK NORMAL<BR>> 6 ge3-4-port A620D270720511 20 4 02-AUG-2007 OK NORMAL<BR>> 7 xcrp3 6Y71D280722196 71 4 11-JUL-2007 OK NORMAL<BR>> 8 xcrp3 6Y71D280722187 71 4 11-JUL-2007 OK NORMAL<BR>> 10
ether-12-port 7U21D130720015 21 4 29-MAR-2007 OK NORMAL<BR>><BR>> [ntc]NT-SE800#show subscribers summary<BR>> --------------------------------------------------------------------------------<BR>> Total=24913<BR>><BR>> Type Authenticating Active Disconnecting<BR>> PPP 0 0 0<BR>>
PPPoE 2 24909 2<BR>> DOT1Q 0 0 0<BR>> CLIPs 0
0 0<BR>> ATM-B1483 0 0 0<BR>> ATM-R1483 0 0 0<BR>> Mobile-IP
0 0 0<BR>> [ntc]NT-SE800#<BR>> [ntc]NT-SE800#<BR>><BR>><BR><BR>--<BR>Best regards,<BR>Yuri<BR></DIV></BLOCKQUOTE></td></tr></table><br>