<html><body><div style="color:#000; background-color:#fff; font-family:arial, helvetica, sans-serif;font-size:12pt"><div><font color="#000000">Hi!!</font></div><div><font color="#000000">I am getting this message during the boot of the XCRP3 card and it is not booting. What may be the problem?</font></div><div><font color="#000000"></font> </div><div><font color="#000000">Issue of CF card???<var id="yui-ie-cursor"></var></font></div><div><em><font color="#0000ff"></font></em> </div><div><em><font color="#0000ff">I am standby<br>set max route entry to 190650<br>filtered interface fxp0<br>booted_partition: 0<br>boot device: wd1<br>root on wd1a dumps on wd2b<br>mountroot: trying msdos...<br>mountroot: trying nfs...<br>mountroot: trying ffs...<br>Standby xcrp's time is in sync with the active's ...<br>root file system type: ffs<br>init: copying out path `/p01/sbin/init' 15<br>** /dev/rwd1a<br>** Last Mounted on /<br>** Root file system<br>** Phase
1 - Check Blocks and Sizes<br>trap type 100 at 5bd1c6c<br>panic: trap type 100 at 5bd1c6c, Machine Status (SRR1) 0x00001032, DAR: 0x0195e008</font></em></div><div><em><font color="#0000ff">syncing disks... done<br>siara2k: dumpsys called</font></em></div><div><em><font color="#0000ff">dumping to dev 10,33 offset 8</font></em></div><div><em><font color="#0000ff">[0]Booting(2)....<br>Enabling L1/L2 Caches...</font></em></div><div><em><font color="#0000ff">Reset Cause:<br> SCC Watchdog Reset (PPC Subsystem ONLY)<br> ISA reset (PPC Subsystem ONLY)</font></em></div><div><br><em><font color="#0000ff">Cold boot, clearing out vxWorks memory space<br>Writing SCC Reset into 0x04EBFFE8<br>SCC RAM controller Initialized<br>Detected Peer XC-RP, will try to establish link....<br>PPC1: Initialized PPC1<br>Monitor 0 channel 1 Voltage is 1.513 V (9B00)<br>PPC1: Polling for commands from
PPC0<br>Monitor 0 channel 2 Voltage is 1.777 V (B600)<br>Monitor 1 channel 1 Voltage is 5.028 V (80C0)<br>Monitor 1 channel 2 Voltage is 3.338 V (AB00)<br>Monitor 1 channel 3 Voltage is 2.534 V (81C0)<br>Monitor 1 channel 4 Voltage is 2.111 V (D840)<br>Monitor 0 Temp = 30.50 C (1E80)<br>Monitor 1 Temp = 28.00 C (1C00)<br>Reading MAC address <br>Backplane EEPROM MAC address 00:30:88:01:FA:4C<br>Welcome to SmartFirmware(tm) for Redback PowerPC Copyright (c) 1999-2005 by Redback Networks, Inc. version 1.0b1272<br>SmartFirmware(tm) Copyright 1996-2000 by CodeGen, Inc.<br>All Rights Reserved.<br>Executing POST<br> PPC0 L2 Cache Test : PASSED<br> Sandisk
Screen Test : PASSED<br> Bridge Test : PASSED<br> PPC SDRAM Test : PASSED<br> SCC SDRAM Test : PASSED<br> Serial(16552) Test :
PASSED<br> Ethernet Test : PASSED<br> ISA Bridge Test : PASSED<br> Forte Test : PASSED<br> Opus Test :
PASSED<br> Max Test : PASSED<br> Bits Test : PASSED<br> SCC Test : PASSED<br> Compact Flash Test :
PASSED<br> PC Card Test : PASSED<br>PASSED Loop 1 of 1, 2012/05/20 15:10:06<br>POST PASSED<br>Auto-boot in 0 seconds - press se* to abort, CR-CR to boot: <br>inflating image from 9142372 bytes to <br>Flushing L1 D-Cache, @ 0x10000, 51525652 bytes <br>PPC1: PPC1 image loaded @0x10000<br>-<br>verifying checksum of /p01/netbsd ... succeeded<br>Flushing L1 D-cache, @ 0x5A00000, 2631657 bytes. Please wait....<br>Syncing L1-I cache, Please wait....<br>launching...<br>Start of symbol table: 0x5d96000<br>End of symbol table: 0x60187e9<br>OFW VERSION: PowerPC,1.0b1272<br>MINIKERNEL VERSION: 23<br>BOOTPATH: </font></em><a><em><font color="#0000ff">/pci/isa@B/ide@i1F0/disk@1,0:a</font></em></a><br><em><font
color="#0000ff">BOOTARGS: /p01/netbsd<br>BOOTDIR: /p01<br>Kernel args[2]: -d<br>[ preserving 2631660 bytes of netbsd ELF symbol table ]<br>pmap_bootstrap: Kernel Start @0x05A00000 to Kernel End @ 0x05D95F50<br>pmap_bootstrap: physmem: 240384 pages<br>pmap_bootstrap: # of available mem regions: 1<br>pmap_bootstrap:after DDB - avail mem regions: 2<br>ptab_cnt: 131072<br>Page Table @ 0x6800000, size: 0x00800000<br>UVM Physical memory: start 0xdeaddead, size 0x00000000<br>dump buffer @ PA: 0x07001000<br>Phys. mem mapped by UVM: start 0x07047000, size 0x389b9000<br>Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001<br> The NetBSD Foundation, Inc. All rights reserved.<br>Copyright (c) 1982, 1986, 1989, 1991, 1993<br> The Regents of the University of California. All rights reserved.</font></em></div><div><em><font color="#0000ff">NetBSD 1.5.3 (CUSTOM_XC2) #0: Fri Jan 29 16:44:01 PST 2010<br>
</font></em><a href="mailto:sysbuild@SWB-node05:/project/sysbuild-extra/builds-ec/REL_6_2/obj/netbsd-kernels/CUSTOM_XC2"><em><font color="#0000ff">sysbuild@SWB-node05:/project/sysbuild-extra/builds-ec/REL_6_2/obj/netbsd-kernels/CUSTOM_XC2</font></em></a><br><em><font color="#0000ff">CPU: 750 (Revision 8302)<br>total memory = 939 MB<br>avail memory = 885 MB<br>using 1024 buffers containing 4096 KB of memory<br>Dumpspace: 0xe93a8000<br>XCRP version 0 (XCRP_VER_2dot6) model 1<br>Backplane Id: 0x3<br>The controller card is in slot 8<br>Chassis product code: 8Y<br>mainbus0 (root)<br>vxmem0 at mainbus0cpu0 at mainbus0<br>L2CR: 0xFD81408C: : 1MB Pipelined synchronous late-write SRAM with parity backside cache enabled<br>scc0 at mainbus0 Local SCC @ 0x60000000 Remote SCC @ 0x70000000<br>SCC Memory Size (from OFW) 256 MB<br>scc_init: Mapped SCC Registers @0xe93bc000<br>scc_init: Mapped vxWorks memory console @0xe93bd000<br>Mapping in 0x02000000 bytes starting @
0x64000000 for PTD driver<br>Mapped REMOTE SCC Memory @0xe94bd000<br>Init 0x08000000 bytes of SCC SDRAM @ 0x68000000 for RDB...Done<br>grackle0 at mainbus0<br>pci0 at grackle0 bus 0<br>pci0: i/o space, memory space enabled<br>pchb0 at pci0 dev 0 function 0<br>pchb0: Motorola product 0x0004 (rev. 0x14)<br>pcib0 at pci0 dev 11 function 0<br>pcib0: Symphony Labs 83C553 PCI-ISA Bridge (rev. 0x10)<br>Symphony Labs 82C105 (IDE mass storage, interface 0x8f, revision 0x05) at pci0 dev 11 function 1 not configured<br>fxp0 at pci0 dev 14 function 0: i82559S Ethernet, rev 9<br>Establishing IRQ 20 of type 3 level 5, func 0x5a03044<br>fxp0: interrupting at irq 20<br>fxp0: detected 64 word EEPROM<br>Found local-mac-address property<br>OF MAC Address: 0x0 0x30 0x88 0x1 0xFA 0x4C <br>fxp0: Ethernet address 00:30:88:01:fa:4c, 10/100 Mb/s<br>inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4<br>inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto<br>isa0
at pcib0<br>com0 at isa0 port 0x4500-0x4507 irq 22: ns16550a, working fifo<br> com0: console<br>Establishing IRQ 22 of type 3 level 3, func 0x5a09370<br>wdcprobe:0: before reset, st0=0x50, st1=0x0<br>wdc1 at isa0 port 0x470-0x477 irq 18<br>Establishing IRQ 18 of type 2 level 6, func 0x5a0afec<br>wdc1:0: before reset, st0=0x50, st1=0x0<br>wd1 at wdc1 channel 0 drive 0: <SMART CF> <multi_single><SMART> <00001011540001053652> <20060729><br>wd1: drive supports 16-sector pio transfers, lba addressing<br>wd1: 488 MB, 993 cyl, 16 head, 63 sec, 512 bytes/sect x 1000944
sectors<br>wd1: drive supports PIO mode 4, DMA mode 2<br>wdcprobe:0: before reset, st0=0x50, st1=0x0<br>wdc2 at isa0 port 0x170-0x177 irq 10<br>Establishing IRQ 10 of type 2 level 6, func 0x5a0afec<br>wdc2:0: before reset, st0=0x50, st1=0x0<br>wd2 at wdc2 channel 0 drive 0: <STI Flash 7.2.0 RBAKCF1GBJI> <multi_single><STI Flash> < STI1J2d106362191959> <12-15-04><br>wd2: drive supports 16-sector pio transfers, lba addressing<br>wd2: 977 MB, 1986 cyl, 16 head, 63 sec, 512 bytes/sect x 2001888 sectors<br>wd2: drive supports PIO mode 4<br>rtc0 at isa0 port 0x7fff8-0x7ffff iomem 0xfd000000-0xfd000007ds1747 reg attached @ 0xe94d5ff8<br>ds1747 nvr attached @ 0xe94d6000<br>Current date : century : 20, 05/20/12 (Mon)<br>Current time : 15:10:40<br>clpd67xx0 at isa0 port 0x3e0-0x3e1 iomem 0xfe0003e0-0xfe0003e1Establishing IRQ 11 of type 3 level 6, func 0x5bf3db0<br>CL-PD6720 rev 12, status = 0xdf, flag = 0x1<br>ipc0 at mainbus0Mapped
Shared Memory Block @ PA 0x5500000 to VA 0x5500000<br>Establishing IRQ 30 of type 3 level 5, func 0x5bd9324<br>107 EPIC : Step 1, Device ID: 0, Vendor ID: 0<br>107 EPIC : # IRQs: 23, # CPUs: 0, Version ID: 2<br>flashattach: configuring 1 flash device(s)<br>PPA Transport Driver v. 1.0<br>init_ptd_sccmem: Init. SCC SDRAM for PTD driver...Done<br>P2P memory: local=0x6401f000 remote=0x7401f000->0xe9658000 size=1048576<br>## ptdmem_add: npg 7648 size 31326208 bmapsz 956 (pg 0xe1255000) ##<br>ptd_extraspace = 0x6401e000<br>remote_ptd_extraspace = 0x7401e000<br>Mapped remote_ptd_extraspace at 0xe9758000<br>pdtattach: configuring 16 pdt devices<br>ephemeral range was 49152-65535, new range is 56608-65535<br>Initializing XCRP INFO area @ 0xfd000000...succeeded <br>Displaying previous reboot data...</font></em></div><div><em><font color="#0000ff">Reboot Recorded on 15:09:49 05/20/12<br>Temperature/Voltage information:<br>Monitor 0 Temp = 30.50 C Monitor
1 Temp = 28.00 C<br>Monitor 0 channel 1 Voltage 1.513 V Monitor 0 channel 2 Voltage 1.777 V<br>Monitor 1 channel 1 Voltage 5.028 V Monitor 1 channel 2 Voltage 3.338 V<br>Monitor 1 channel 3 Voltage 2.534 V Monitor 1 channel 4 Voltage 2.111 V<br>OFW Reset Cause: SCC Watchdog Reset ISA reset <br>BSD Reboot recorded on 15:09:17 05/20/12 (Sun)<br>Reboot by BSD - BSD_REBOOT_ON_PANIC<br>Initializing RTC NVRAM LOG area @ fd001400 succeeded<br>Initializing XCRP L2 Cache Log area @ 0xfd06fe00...succeeded <br>Using local P2P memory @ PA 0x6401F000<br>P2P device: <br>Carving scc mem 0x68000000<br>header_start = 0x68000020 no_of_header_blocks 1<br>vxWorks is booting!!!!!<br>Waiting for Vxworks to find active and standby...<br>....VX Redundancy state: ### VX_BOOT_DONE TRUE ###<br>.VX Redundancy state: ### VERSION B3 TRUE ###<br>.VX Redundancy state: ### VX_M2M_LINKUP TRUE ###<br>xcrp will let the active
sync timeNotifying all processes of M2MUP status<br>VX Redundancy state: ### VX_IS_ACTIVE FALSE ###<br>Notifying all processes of STANDBY status<br>Using remote P2P memory @ PA 0xE9658000<br>VX Redundancy state: ### VX_ACTSTB_DECIDED TRUE ###<br>start using scc to keep time...</font></em></div><div><em><font color="#0000ff">I am standby<br>set max route entry to 190650<br>filtered interface fxp0<br>booted_partition: 0<br>boot device: wd1<br>root on wd1a dumps on wd2b<br>mountroot: trying msdos...<br>mountroot: trying nfs...<br>mountroot: trying ffs...<br>Standby xcrp's time is in sync with the active's ...<br>root file system type: ffs<br>init: copying out path `/p01/sbin/init' 15<br>** /dev/rwd1a<br>** Last Mounted on /<br>** Root file system<br>** Phase 1 - Check Blocks and Sizes<br>trap type 100 at 5bd1c84<br>panic: trap type 100 at 5bd1c84, Machine Status (SRR1) 0x00001032, DAR:
0x7fffddb0</font></em></div><div><em><font color="#0000ff">syncing disks... done<br>siara2k: dumpsys called</font></em></div><div><em><font color="#0000ff">dumping to dev 10,33 offset 8</font></em></div><div><em><font color="#0000ff">[0]Booting(2)....<br>Enabling L1/L2 Caches...</font></em></div><div><em><font color="#0000ff">Reset Cause:<br> SCC Watchdog Reset (PPC Subsystem ONLY)<br> ISA reset (PPC Subsystem ONLY)</font></em></div></div></body></html>