<div dir="ltr">Here is a basic config for Dual Stack PPPoE subscribers.<div><br></div><div><div> interface pool multibind</div><div> ip address <a href="http://192.0.2.1/24">192.0.2.1/24</a></div><div> ipv6 address 2001:db8:db8::1/56</div>
<div> ip pool <a href="http://192.0.2.0/24">192.0.2.0/24</a></div><div> ipv6 pool 2001:db8:db8:2::/64 2001:db8:db8:ff::/64 </div><div> ipv6 pool dhcpv6 2001:db8:db8:1100::/56 2001:db8:db8:ff00::/56</div><div>!</div><div>
subscriber default</div><div> ip address pool</div><div> ip source-validation</div><div> ipv6 framed-pool </div><div> ipv6 delegated-prefix maximum 1</div><div> ipv6 source-validation</div></div><div><br></div><div>
The "ipv6 pool" is for ND, and the "ipv6 pool dhcpv6" is for PD. Since you have unnumbered interfaces, just change the command "ipv6 address" to unnumbered.</div><div><br></div><div>Tomás</div>
</div><div class="gmail_extra"><br><br><div class="gmail_quote">On Wed, Nov 6, 2013 at 3:47 PM, Alex D. <span dir="ltr"><<a href="mailto:listensammler@gmx.de" target="_blank">listensammler@gmx.de</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
no suggestion ?<br>
<br>
-------- Original-Nachricht --------
<table border="0" cellpadding="0" cellspacing="0">
<tbody>
<tr>
<th align="RIGHT" nowrap valign="BASELINE">Betreff: </th>
<td>[rbak-nsp] Dual-Stack configuration for PPPoE subscribers</td>
</tr>
<tr>
<th align="RIGHT" nowrap valign="BASELINE">Datum: </th>
<td>Thu, 31 Oct 2013 11:13:34 +0100</td>
</tr>
<tr>
<th align="RIGHT" nowrap valign="BASELINE">Von: </th>
<td>Alex D. <a href="mailto:listensammler@gmx.de" target="_blank"><listensammler@gmx.de></a></td>
</tr>
<tr>
<th align="RIGHT" nowrap valign="BASELINE">An: </th>
<td><a href="mailto:redback-nsp@puck.nether.net" target="_blank">redback-nsp@puck.nether.net</a></td>
</tr>
</tbody>
</table><div><div class="h5">
<br>
<br>
<pre>Hi,
currently we have ~8000 PPPoE users terminated on a SE600 running
SEOS-11.1.2.4p3. All users get IPv4 addresses either from a dynamic pool
or as a framed-ip assigned via RADIUS. In the near future, i also want
to assign IPv6 addresses to the customers. The SE600 itself is already
configured for IPv6, but i didn't activate it in the logical
"subscriber"-interface.
Can someone give me a hint, which stebs are necessary for extending my
setup?
Questions:
- Is it enough to configure a ipv6 pool on the "SUBSCRIBER" interface
and refer to it in the "subscriber default" ?
- Where can i configure my delegated-prefix pool ?
- Is it possible to activate or deactivate IPv6 for certain customers,
e.g. based on a specific RADIUS attribute (compared to Ciscos AVpair
"lcp:interface-config#1=ipv6 enable") ?
Here's the relevant IPv4 part of my configuration:
context local
~
interface LOOPBACK-0 loopback
ip address <ip>/32
ipv6 address <ipv6>/128
ip source-address snmp radius tacacs+ syslog
!
interface SUBSCRIBER multibind lastresort
ip unnumbered LOOPBACK-0
ip clear-df
ip pool <network>/18
!
subscriber default
ip address pool name SUBSCRIBER
port-limit 6
ppp mtu 1492
dns primary <ip>
dns secondary <ip>
!
Thanks in advance...
Regards,
Alex
_______________________________________________
redback-nsp mailing list
<a href="mailto:redback-nsp@puck.nether.net" target="_blank">redback-nsp@puck.nether.net</a>
<a href="https://puck.nether.net/mailman/listinfo/redback-nsp" target="_blank">https://puck.nether.net/mailman/listinfo/redback-nsp</a>
</pre>
</div></div></div>
<br>_______________________________________________<br>
redback-nsp mailing list<br>
<a href="mailto:redback-nsp@puck.nether.net">redback-nsp@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/redback-nsp" target="_blank">https://puck.nether.net/mailman/listinfo/redback-nsp</a><br>
<br></blockquote></div><br></div>