<p dir="ltr">As i previously said you have to balance packets from the other side so all the circuits will be homed in different ports. And also use several vlans. </p>
<div class="gmail_quote">15 авг. 2014 г. 23:24 пользователь "Tudor Capatina" <<a href="mailto:Tudor@nedlook.nl">Tudor@nedlook.nl</a>> написал:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div>
<div style="direction:ltr;font-family:Tahoma;color:#000000;font-size:10pt">I have used access economical but the result was the same unfortunately.<br>
<div><br>
<div style="font-family:Tahoma;font-size:13px">Best regards,<br>
Tudor Capatina<br>
Xenosite BV</div>
</div>
<div style="font-family:Times New Roman;color:#000000;font-size:16px">
<hr>
<div style="direction:ltr"><font face="Tahoma" color="#000000"><b>From:</b> Dave Bell [<a href="mailto:me@geordish.org" target="_blank">me@geordish.org</a>]<br>
<b>Sent:</b> 15 August 2014 20:19<br>
<b>To:</b> Tudor Capatina<br>
<b>Cc:</b> Marcin Kuczera; <a href="mailto:redback-nsp@puck.nether.net" target="_blank">redback-nsp@puck.nether.net</a><br>
<b>Subject:</b> Re: [rbak-nsp] link-group access on SE-100<br>
</font><br>
</div>
<div></div>
<div>
<p dir="ltr">If you are using multiple vlans, the redback will balance then across the constituent circuits itself if you are using access economical.
</p>
<div class="gmail_quote">On 15 Aug 2014 17:57, "Tudor Capatina" <<a href="mailto:Tudor@nedlook.nl" target="_blank">Tudor@nedlook.nl</a>> wrote:<br type="attribution">
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF">
<div style="direction:ltr;font-family:Tahoma;color:#000000;font-size:10pt">Hello Marcin,
<div><br>
</div>
<div>The reason why it made sense to me is the need for more bandwidth for the subscriber circuits. So the only solution would be to look at an upgrade of the platform? Or in my specific case i guess i could split the 200 vlan's on two ports - 100 each, it
should get me more bandwidth - and not use link-group?</div>
<div>
<div><br>
</div>
<div>Would it make any difference if i would have the constituent ports of the link-group on different MIC cards in the SE-100?</div>
<div><br>
</div>
<div>Thanks!</div>
<div><br>
<div style="font-family:Tahoma;font-size:13px">Best regards,<br>
Tudor Capatina<br>
Xenosite BV</div>
</div>
<div style="font-family:Times New Roman;color:#000000;font-size:16px">
<hr>
<div style="direction:ltr"><font face="Tahoma" color="#000000"><b>From:</b> redback-nsp [<a href="mailto:redback-nsp-bounces@puck.nether.net" target="_blank">redback-nsp-bounces@puck.nether.net</a>] on behalf of Marcin Kuczera [<a href="mailto:marcin@leon.pl" target="_blank">marcin@leon.pl</a>]<br>
<b>Sent:</b> 15 August 2014 19:25<br>
<b>To:</b> <a href="mailto:redback-nsp@puck.nether.net" target="_blank">redback-nsp@puck.nether.net</a><br>
<b>Subject:</b> Re: [rbak-nsp] link-group access on SE-100<br>
</font><br>
</div>
<div></div>
<div>
<div>On 2014-08-15 16:09, Tudor Capatina wrote:<br>
</div>
<blockquote type="cite">
<div style="direction:ltr;font-family:Tahoma;color:#000000;font-size:10pt">Hi folks,<br>
</div>
</blockquote>
<br>
In my opinion - access mode on SE100 makes no sense...<br>
SmartEdge in this mode sends traffic only via signle link.<br>
It makes sense when you have 2 linecards and link-group spans between linecards.<br>
Than, in case of linecard crash traffic continues to flow.<br>
<br>
Other modes - dot1q - will do load sharing, but you can't have subscriber circuits on them (pppoe, clips).<br>
<br>
Marcin<br>
<br>
<br>
<blockquote type="cite">
<div style="direction:ltr;font-family:Tahoma;color:#000000;font-size:10pt">
<div><br>
I configured an access link-group between a SE-100 and a Brocade MLX. The problem i face is that traffic from the Brocade towards the Redback is being split among the links but the other way around, the Redback sends traffic using just one link. I have set
the link-group both with LACP and static but the result was the same.<br>
I have tried both round-robin / interface-based, created the link-group both as access and access-economical, had the link-group both static and lacp - same result was reached.
<br>
I was wondering if this is a limitation of the SE-100 unit or i am missing something?<br>
<br>
Brocade config and some outputs:<br>
<div>lag "se100" dynamic id 1</div>
<div> ports ethernet 1/1 to 1/2</div>
<div> primary-port 1/1</div>
<div> deploy</div>
<div> port-name "rd1-se100-lag" ethernet 1/1</div>
<div> port-name "rd1-se100-lag" ethernet 1/2<br>
<br>
<div>
<div>#sh int e 1/1 | i rate</div>
<div> 30 second input rate: 111758468 bits/sec, 19734 packets/sec, 11.49% utilization</div>
<div> 30 second output rate: 64714241 bits/sec, 11604 packets/sec, 6.65% utilization</div>
<div>#sh int e 1/2 | i rate</div>
<div><span style="background-color:rgb(255,255,0)"> 30 second input rate: 34 bits/sec, 0 packets/sec, 0.00% utilization << not used<br>
</span></div>
<div> 30 second output rate: 33963516 bits/sec, 10184 packets/sec, 3.56% utilization</div>
</div>
<br>
Redback config and some outputs:<br>
<br>
<div>
<div>link-group rd2-lag access</div>
<div> encapsulation dot1q</div>
<div> dot1q pvc on-demand 1000 through 1199 aaa <br>
</div>
<div> idle-down 600</div>
<div> maximum-links 2</div>
<div> lacp active</div>
<div> protect-group incoming-port</div>
</div>
<div><br>
</div>
<div>
<div>#sh link-group rd2-lag det</div>
<div><br>
</div>
<div>Link-Group: rd2-lag, ID : 27, State : Up</div>
<div>------------------------------------------------------------------------------</div>
<div>Ccct count : 2 Grouping : LoadShare</div>
<div>Card Type : carrier Type : access</div>
<div>Bindings : Unbound Minimum-links : 1</div>
<div>Maximum-links : 2</div>
<div>Prot-Group-Type : round-robin</div>
<div>Internal Handle : 255/22:1:28/1/1/4610</div>
<div>Description :</div>
<div>Constituent Circuits:</div>
<div><span style="background-color:rgb(255,255,0)"> 1. 2/15 (Up )| 0.13%</span></div>
<div><span style="background-color:rgb(255,255,0)"> 2. 2/16 (Up )| 0.00%</span></div>
<div><br>
</div>
<div>#sh la act</div>
<div> Port Port Oper Recv Seln</div>
<div>Lg-id Port State Priority key State State</div>
<div>----------------------------------------------------------------------</div>
<div><span style="font-size:10pt;background-color:rgb(255,255,0)">27 2/15 0x3f 32767 27 exchg active</span></div>
<div><span style="background-color:rgb(255,255,0)">27 2/16 0x3f 32767 27 exchg active</span></div>
</div>
<br>
</div>
Just as a note, non-access link-groups btw the Brocade MLX and the Redback unit work fine.<br>
<br>
<div style="font-family:Tahoma;font-size:13px">Best regards,<br>
Tudor Capatina<br>
</div>
</div>
</div>
<br>
<fieldset></fieldset> <br>
<pre>_______________________________________________
redback-nsp mailing list
<a href="mailto:redback-nsp@puck.nether.net" target="_blank">redback-nsp@puck.nether.net</a>
<a href="https://puck.nether.net/mailman/listinfo/redback-nsp" target="_blank">https://puck.nether.net/mailman/listinfo/redback-nsp</a>
</pre>
</blockquote>
<br>
<br>
<div>-- <br>
<p style="font-family:Helvetica,Arial,sans-serif;font-size:12px;line-height:14px;color:#999999">
<span style="font-weight:bold">Marcin Kuczera</span> <span>/</span> <span style="color:#999">
Specjalista d/s telekomunikacji, Wiceprezes Zarządu<span><br>
<span style="color:#999"><a href="tel:%2B48%2032%20440%2080%2071" value="+48324408071" target="_blank">+48 32 440 80 71</a><span>/</span>
<a href="mailto:marcin.kuczera@leon.pl" style="color:#51930b" target="_blank">marcin.kuczera@leon.pl</a></span></span></span></p>
<p style="font-family:Helvetica,Arial,sans-serif;font-size:12px;line-height:14px">
<span style="font-weight:bold;color:#999">Leon Sp. z o.o.</span> <span style="color:#999">
</span><span><br>
</span><span style="color:#999">ul. Kilińskiego 33d, 44-200 Rybnik </span><br>
<a href="http://www.leon.pl/" style="color:#51930b" target="_blank">http://www.leon.pl/</a></p>
<p style="font-family:Helvetica,Arial,sans-serif;color:#999999;font-size:12px;line-height:14px">
INTERNET | TELEWIZJA | TELEFON</p>
<p><a href="https://www.facebook.com/LeonInternet?ref=hl" target="_blank"><img src="cid:part3.01020901.01080007@leon.pl" alt="Facebook"></a></p>
<p style="font-family:Helvetica,Arial,sans-serif;font-size:12px;line-height:14px">
<span style="color:#999">KRS 0000223101 Sąd Rejonowy w Gliwicach<br>
<span style="color:#999"></span><span style="color:#999">Kapitał zakładowy 200.000 zł<br>
<span style="color:#999"></span><span style="color:#999">NIP: 6332068698</span></span></span></p>
</div>
</div>
</div>
</div>
</div>
</div>
<br>
_______________________________________________<br>
redback-nsp mailing list<br>
<a href="mailto:redback-nsp@puck.nether.net" target="_blank">redback-nsp@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/redback-nsp" target="_blank">https://puck.nether.net/mailman/listinfo/redback-nsp</a><br>
<br>
</blockquote>
</div>
</div>
</div>
</div>
</div>
<br>_______________________________________________<br>
redback-nsp mailing list<br>
<a href="mailto:redback-nsp@puck.nether.net">redback-nsp@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/redback-nsp" target="_blank">https://puck.nether.net/mailman/listinfo/redback-nsp</a><br>
<br></blockquote></div>