[VoiceOps] Issue with Cisco Catalyst Switch in IBM Blade Center

Ujjval Karihaloo ujjval at simplesignal.com
Wed Nov 25 14:32:09 EST 2009


How often does the issue occur ?

I will confirm the switch model.

The switch seemed really bogged down and slow in responding to commands on the login session and once we rebooted it, the issue cleared away.

Ujjval Karihaloo
VP Voice Engineering
IP Phone: +13032428610
E-Fax: +17202391690

SimpleSignal Inc.
88 Inverness Circle East
Suite K105
Englewood, CO  80112


-----Original Message-----
From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Carlos Alvarez
Sent: Wednesday, November 25, 2009 12:23 PM
Cc: voiceops at voiceops.org
Subject: Re: [VoiceOps] Issue with Cisco Catalyst Switch in IBM Blade Center

On 11/25/09 11:43 AM, Ujjval Karihaloo wrote:
> Hi All:
>
> Have you seen issues with Cisco Catalyst Switch in the IBM Blade Center
> that causes all the other Cards in the Blade Center to be partially
> responsive. All the Servers were responding to pings 50% of the time
> with some pings getting back invalid responses like the one below:

I'm not familiar with the IBM, but use a Dell blade system with Cisco 
Catalyst 5316M switches in it, and have seen a similar issue.  Is this 
also a 5316M switch?


-- 
Carlos Alvarez
TelEvolve
602-889-3003

Advanced phone services simplified
_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org
https://puck.nether.net/mailman/listinfo/voiceops


More information about the VoiceOps mailing list