[VoiceOps] PRI Termination device
rj at voxeo.com
Fri Oct 30 02:38:58 EDT 2009
Look at the audio codes boxes. Good stuff.
Sent from my iPhone
On Oct 30, 2009, at 1:30, Peter Childs <pchilds at internode.com.au> wrote:
> Might be worth adding a Dialogic IMG 1004 as well to you list of kit
> to look at.
> The new 29xx Cisco routers have been released with higher density
> PVDM3 modules.
> The AS5300/5350/5400/5350XM etc type devices have a pretty long
> history. I believe they were designed as more of an access product,
> rather than the 2800/2800 integrated services routers. I'm not
> sure if the 2800's do things like resource-pool discrimination and
> 56k dial termination, although some of these things are not as
> important as they once were. The AccessServer platforms are the
> workhorses of dial solutions, dial-and-voice, and with MGCP various
> SS7 interconnect solutions...
> On 30/10/2009, at 6:22 AM, Jonathan Thurman wrote:
>> I am looking for suggestions for a device to terminate some PRIs. We
>> are looking to bring in two PRIs from a vendor, and want to provide
>> another PRI out to an on-premise device and attach to our VoIP
>> solution over SIP. Are there any devices that accomplish all of
>> at the same time?
>> - At least 4 PRI ports
>> - Act as Network and User
>> - SIP Gateway
>> VoiceOps mailing list
>> VoiceOps at voiceops.org
> VoiceOps mailing list
> VoiceOps at voiceops.org
More information about the VoiceOps