[VoiceOps] SIP routing engine - growing pains
Alex Balashov
abalashov at evaristesys.com
Fri Oct 30 17:55:23 EDT 2009
I would agree with Scott strongly.
Scott Berkman wrote:
> OpenSIPs/Kamillo/SER or whatever it's called today can do most of this out
> of the box. I think it's the best option to match your needs if you have
> the time and engineering to figure it out.
>
>>From there you can go to the Acme/Covergence SBC platforms, the lower end
> Covergence will run in a VM or on your own hardware, but can handle most of
> what you are looking for.
>
> Only thing on the list this doesn't include is the T.38 fax stuff, but since
> all of these would require separate media gateways anyway, that's the only
> place you need the T.38 supported, SER or the SBC would just pass the SDP
> along.
>
> -Scott
>
> -----Original Message-----
> From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org]
> On Behalf Of Jay Hennigan
> Sent: Friday, October 30, 2009 4:21 PM
> To: VoiceOps
> Subject: [VoiceOps] SIP routing engine - growing pains
>
> Trying to pick the collective brain here!
>
> Scenario:
>
> We are a growing network service provider with ISP roots. We got into
> VoIP by selling outsourced hosted PBX services. Merged with a company
> doing early Asterisk deployment of hosted VoIP.
>
> Now doing trunk replacement with Adtran TA9xx at customer premise.
>
> PSTN connections are PRI trunks to a wholesale provider routed through
> ah Atlas 550 to feed our Asterisk and Cisco 5350 SIP gateways, SIP
> trunking and some offnet via outsources hosted PBX provider. Recently
> added local ENUM database server feeding the 5350s as dial-peers got
> unwieldy.
>
> Our ultimate goal is to migrate from the outsourced hosted provider to
> our own Broadsoft platform or equivalent but we're not yet at critical
> mass to make that financially viable. We're presently peaking at about
> 150 to 200 simultaneous calls busy hour through our own fabric plus
> about that on the hosted PBX provider offnet.
>
> What I'm looking for:
>
> SIP routing engine and/or softswitch but don't need feature server.
> Needs to do at a minimum:
>
> * SIP routing based on destination number or pattern.
> * Registrar for remote Adtran TA9xx at customer sites.
> * Interface via SIP with 5350s for calls using PRI to PSTN.
> * Fax compatibility T.38/G.711 passthrough.
> * Support multiple SIP carriers inbound and outbound.
> * CDR generation.
> * Robust enough for solid performance - failover pair or load-balanced
> * Ability to grow to handle ~1000 simultaneous calls
>
> Nice to have:
>
> * LCRE based on time of day or destination pattern.
> * Geographic redundancy, located in multiple POPs.
> * NAT traversal B2BUA type functionality
> * IPv6 or at least a path to IPv6 functionality
> * Transcoding
>
> Suggestions and/or recommendations?
>
> --
> Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
> Impulse Internet Service - http://www.impulse.net/
> Your local telephone and internet company - 805 884-6323 - WB6RDV
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops
>
>
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops
--
Alex Balashov - Principal
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
More information about the VoiceOps
mailing list