[VoiceOps] Allworx Followme - no audio issue

Stappenbeck, Mark MStappenbeck at allworx.com
Tue Jul 19 13:26:12 EDT 2011


Have you opened a ticket with Allworx support yet and supplied a packet capture from the Allworx server side?
Newer versions of phone code will capture the SIP messaging in the customer service log. 
    
 


-----Original Message-----
From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Ujjval Karihaloo
Sent: Tuesday, July 19, 2011 1:23 PM
To: Mark Holloway
Cc: voiceops at voiceops.org
Subject: Re: [VoiceOps] Allworx Followme - no audio issue

Its NAT'ed

It does work for a normal call forward. Only followme with Answer
Confirmation is what causes no Audio.

I wanted to see if someone has run into this. I am collecting traces from
Customer PBX also now to take a deeper look and compare.



-----Original Message-----
From: Mark Holloway [mailto:mh at markholloway.com]
Sent: Tuesday, July 19, 2011 11:17 AM
To: Ujjval Karihaloo
Cc: Alex Balashov; voiceops at voiceops.org
Subject: Re: [VoiceOps] Allworx Followme - no audio issue

Is the Allworx WAN port on a public IP or are you NATing the Allworx
through a firewall?


On Jul 19, 2011, at 9:49 AM, Ujjval Karihaloo wrote:

> Call from PSTN to our Broadsoft/ACME to Customer SIP Trunk/Allworx
>
> Allworx forwards/followme call back out (to a cell phone) the same SIP
> trunk to us and we terminate to the PSTN (cell phone)
>
> PSTN cell phone answers and Allworx plays announcement - press 1 to
answer
> the call.
>
> PSTN cell phone presses 1 to answer the call following which there is no
> audio in either direction.
>
> In the packet capture between Allworx and my ACME (access SIDE) - I see
> RTP flowing, I also see RTP flowing between ACME and my Upstream carrier
> who terminated the call..and inbound carrier who delivered the inbound
> call to me.
>
>
>
>
>
> -----Original Message-----
> From: voiceops-bounces at voiceops.org
[mailto:voiceops-bounces at voiceops.org]
> On Behalf Of Alex Balashov
> Sent: Tuesday, July 19, 2011 10:43 AM
> To: voiceops at voiceops.org
> Subject: Re: [VoiceOps] Allworx Followme - no audio issue
>
> On 07/19/2011 12:40 PM, Ujjval Karihaloo wrote:
>> Hi All:
>>
>>    We have a customer with Allworx PBX that is setup for followme on
>> an extension that forwards to a call Phone. When the call gets
>> forwarded, back out the SIP Turnk intous, the allworx has answer
>> confirmation which the followme/cellphone hears fine, when the
>> followme cell phone presses 1 to accept the call, all audio is lost
>> both ways.  Call stays up until disconnected. The Allworx sends a
>> REINVITE after the "1" is pressed.too
>>
>> Anyone seen this behavior with ACME and Allworx and any remedies.
>
> Well, what exactly is the SIP flow?
>
> --
> Alex Balashov - Principal
> Evariste Systems LLC
> 260 Peachtree Street NW
> Suite 2200
> Atlanta, GA 30303
> Tel: +1-678-954-0670
> Fax: +1-404-961-1892
> Web: http://www.evaristesys.com/
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops
_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org
https://puck.nether.net/mailman/listinfo/voiceops



More information about the VoiceOps mailing list