[VoiceOps] ACME behaviour with Bad NAT Firewalls
ujjval at simplesignal.com
Wed Jun 8 23:36:26 EDT 2011
We have seen many PBX NAT’ed behind a Firewall that does not do the Sip
ALG correctly. Most cases putting the Private IP in the Contact header and
the ACME responds back to the Private IP.
Example call inbound to the PBX, the PBX sends a 200 OK (as call is
answered) with a Private IP in the contact header. ACME sends the ACK back
to the Private IP blackholing it.
I have seen SBC’s that do adjust to the Layer 3 IP:port if they notice
Private IPs in the SIP signaling. Is there a setting on ACME to do that?
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the VoiceOps