[VoiceOps] Acme Packet/Broadsoft/ENUM

[Robert Dawson]

Perfect - thanks again.

Just to clarify, NetSrvr and NetSrvr2 are the actual names of the SAGs on the AP?

> -----Original Message-----
> From: Tim Thompson [mailto:timthompson at nicodem.us]
> Sent: Thursday, January 05, 2012 5:51 PM
> To: Robert Dawson
> Cc: voiceops at voiceops.org
> Subject: Re: [VoiceOps] Acme Packet/Broadsoft/ENUM
> 
> We also use powerdns, but use the pipe backend to pass it through some
> in-house code, which is itself backended by oracle. This works more or
> less the same, but you gain some additional control via the pipe
> backend.
> 
> Here's the results of a 'show enum lookup'. DNs and FQDNs have been
> changed to protect the innocent.
> 
> Enum Lookup Result:
> Query Name -->
>         +9165551212
> Answers -->
>         sip:+19165551212 at NetSrvr ttl= 120
>         sip:+19165551212 at NetSrvr2 ttl= 120
> 
> And the associated cache-entry:
> Query-->
>         Q:NAPTR 2.1.2.1.5.5.5.6.1.9.tld ttl=48
> Answers-->
> 
>            order=50 pref=1 "u" "E2U+sip"
> "!^.*$!sip:+19165551212 at NetSrvr!" ""
> 
>            order=50 pref=2 "u" "E2U+sip"
> "!^.*$!sip:+19165551212 at NetSrvr2!" ""
> 
> The same query via dig:
> 
> ;; ANSWER SECTION:
> 2.1.2.1.5.5.5.6.1.9.tld. 120 IN NAPTR 50 1 "u" "E2U+sip"
> "!^.*$!sip:+19165551212 at NetSrvr!" .
> 2.1.2.1.5.5.5.6.1.9.tld. 120 IN NAPTR 50 2 "u" "E2U+sip"
> "!^.*$!sip:+19165551212 at NetSrvr2!" .
> 
> 
> Both NetSrvr and NetSrvr2 are SAGs, with the two netservers'
> session-agents in reverse orders, per best practices. (i.e. Net1/Net2,
> Net2/Net1.)
> 
> Hope this helps,
> -Tim
> 
> 
> On 01/05/2012 02:19 PM, Robert Dawson wrote:
> > Sure, anything would be helpful. I am using powerdns with a mysql
> backend, sounds similar to your setup.
> >
> > Thanks,
> > Rob
> >
> >> -----Original Message-----
> >> From: voiceops-bounces at voiceops.org [mailto:voiceops-
> >> bounces at voiceops.org] On Behalf Of Tim Thompson
> >> Sent: Thursday, January 05, 2012 4:01 PM
> >> To: voiceops at voiceops.org
> >> Subject: Re: [VoiceOps] Acme Packet/Broadsoft/ENUM
> >>
> >> Rob,
> >>
> >> We use a custom in-house ENUM solution that queries a database in
> real
> >> time, so I can't offer you an actual zone snippet. I could give some
> >> examples of what 'show enum lookup' or dig would return, if that
> would
> >> be helpful.
> >>
> >> -Tim
> >>
> >>
> >> On 01/05/2012 11:12 AM, Robert Dawson wrote:
> >>> Is anyone using ENUM with their Acme/BS deployment that wouldn't
> mind
> >>> sharing a snippet of their zone file showing the proper record
> >>> configuration?
> >>>
> >>>
> >>>
> >>> Thanks,
> >>>
> >>> Rob
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> VoiceOps mailing list
> >>> VoiceOps at voiceops.org
> >>> https://puck.nether.net/mailman/listinfo/voiceops
> >> _______________________________________________
> >> VoiceOps mailing list
> >> VoiceOps at voiceops.org
> >> https://puck.nether.net/mailman/listinfo/voiceops