[VoiceOps] Broadworks: Preserve sip call-ID

[Michael Lunsford]

Unfortunately, I don't have my fingers on one any longer.  Have you requested vendor support?


On Mar 15, 2012, at 2:35 PM, Rakesh Unni wrote:

Any tips on the setup mate?

Much appreciated,
Rakesh

Sent from my iPad

On 15 Mar 2012, at 16:53, Michael Lunsford <Michael.Lunsford at cbeyond.net> wrote:

> Palladion has options other than Call-ID that will allow correlation of call legs including SDP.
> 
> 
> On Mar 15, 2012, at 12:42 PM, Rakesh Unni wrote:
> 
> It's Palladion  we are trying. Not sure why they worry about call-ID manipulation, guess it has some reference to the licensing   validation for transactions.
> 
> Thanks
> Rakesh
> 
> On 15 March 2012 16:19, Hiers, David <David.Hiers at adp.com<mailto:David.Hiers at adp.com>> wrote:
> Never had to try, but I've never seen anything in BW that is even close to this.  I know that you can't get them to take the "BW" out of the call-ID (sigh....).
> 
> You're asking for something that is pretty brittle. If you ever fork, you can't preserve the inbound call-ID on the multiple outbound legs, because call-IDs must be globally unique (RFC3261:8.1.1.4).
> 
> 
> 
> David
> 
> 
> From: voiceops-bounces at voiceops.org<mailto:voiceops-bounces at voiceops.org> [mailto:voiceops-bounces at voiceops.org<mailto:voiceops-bounces at voiceops.org>] On Behalf Of Rakesh Unni
> Sent: Thursday, March 15, 2012 08:47
> 
> To: VoiceOps at voiceops.org<mailto:VoiceOps at voiceops.org>
> Subject: [VoiceOps] Broadworks: Preserve sip call-ID
> 
> 
> 
> Hi guys,
> 
> We are running r17 at the moment and currently testing a monitoring platform for both signalling and media. They use sip callID to identify call legs to merge and i would like to have all call legs on one call (from the originating access side to where we send the traffic to for PSTN). Since Broadworks act as a B2BUA it rewrites the originating callID to BW-xxxxx. I've made changes on the SBC to preserve the callID but now need Broadworks to preserve it.
> 
> Is it possible on Broadworks to transparent proxy the callID from the access side to the terminating side ?
> 
> Thanks
> Rakesh
> 
> ________________________________
> This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
> 
> 
> 
> 
> --
> Rakesh
> 
> +44 2033931856
> sip:unni at getonsip.com<mailto:sip%3Aunni at getonsip.com>
> 
> 
>