[VoiceOps] 8 Port ATA

[Brian R]

I have to agree with Matthew on this.  We use SPA8000s but have often replaced them with the Adtran TA900 series (904,908,912,916,924 are the models we stock).  Especially when faxing has been a problem.
Most of the time all the config will take is:
 
voice user 1112223333
  connect fxs 0/1
  password "password"
  sip-identity 1112223333 T01 register auth-name "1112223333" password "password"
  sip-authentication password "password"
  codec-group G711ONLY

We have noticed with a couple of odd ball fax machines we have had to set some fax specific stuff:
  modem-passthrough
  t38
  t38 redundancy high-speed 2
  t38 redundancy low-speed 2

Brian
 



From: matthew at corp.crocker.com
Date: Thu, 15 Nov 2012 15:49:16 -0500
To: nick at flhsi.com
CC: voiceops at voiceops.org
Subject: Re: [VoiceOps] 8 Port ATA



Adtran TA 908 ??  Probably overkill but it works and works well



--
Matthew S. Crocker
President
Crocker Communications, Inc.
PO BOX 710
Greenfield, MA 01302-0710

E: matthew at crocker.com
P: (413) 746-2760
F: (413) 746-3704
W: http://www.crocker.com




On Nov 15, 2012, at 3:42 PM, "Nick Olsen" <nick at flhsi.com> wrote:
We've used the Cisco/Linksys SPA-8000's And haven't liked them to much.

Anyone have any recommendations on an 8 port FXS ATA?


Nick Olsen
Network Operations 
(855) FLSPEED  x106

_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org
https://puck.nether.net/mailman/listinfo/voiceops


_______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/voiceops/attachments/20121115/08aa8fde/attachment.html>