[VoiceOps] T1 Crossover Cable
kris at kriskinc.com
Fri Oct 31 09:10:09 EDT 2014
If it's a 904 (not 904e) and you're using the DSX-1 port no crossover cable
required. Straighthrough it is.
On Friday, October 31, 2014, David Wessell <david at ringfree.biz> wrote:
> I'm connecting a Adtran 904 to a Shoretel system for a voice only PRI.
> Am I correct that a cross-over cable is needed and not a straight thru
> cable? The IT vendor and I are having a small disagreement.
> [image: Ringfree Communications, Inc] <http://ringfree.biz/>
> David Wessell / President
> 828-575-0030 x101/ david at ringfree.biz
> Ringfree Communications, Inc Office: 828-575-0030 / Fax: 888-243-7830
> PO BOX 1994 Hendersonville, NC 28793
> This e-mail message may contain confidential or legally privileged
> information and is intended only for the use of the intended recipient(s).
> Any unauthorized disclosure, dissemination, distribution, copying or the
> taking of any action in reliance on the information herein is prohibited.
> E-mails are not secure and cannot be guaranteed to be error free as they
> can be intercepted, amended, or contain viruses. Anyone who communicates
> with us by e-mail is deemed to have accepted these risks. Company Name is
> not responsible for errors or omissions in this message and denies any
> responsibility for any damage arising from the use of e-mail. Any opinion
> and other statement contained in this message and any attachment are solely
> those of the author and do not necessarily represent those of the company.
Sent from mobile device
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the VoiceOps