[VoiceOps] SIP ladder diagram builder

[Richard Jobson]

You’re very welcome. Yes, you’d have to play the raw packets through this system again  from  your PCAP

On 2/25/17, 4:17 PM, "Alex Balashov" <abalashov at evaristesys.com> wrote:

    That's good to know. 
    
    However, what I need in this case is a tool to render diagrams from already existing captures obtained by a variety of other means. 
    
    
    On February 25, 2017 6:15:51 PM EST, Richard Jobson <richard at teraquant.com> wrote:
    >Hi Alex
    >
    >It is raw packet capture [e.g. SIP, ENUM etc RTP and RTCP] from a tap
    >such as a span sport/port mirroring. Totally vendor independent 
    >standalone system, software only, runs on Debian Linux. Also can act as
    >a VQ Collector to collect  out-of-band RTCP-XR
    >
    >Many thanks
    >Richard
    >
    >On 2/25/17, 4:05 PM, "VoiceOps on behalf of Alex Balashov"
    ><voiceops-bounces at voiceops.org on behalf of abalashov at evaristesys.com>
    >wrote:
    >
    >    Hi Richard, 
    >    
    >I have no opposition to commercial products. Is this a standalone tool
    >for generic SIP capture analysis? Or is it part of a larger system of
    >some kind? 
    >    
    >    -- Alex
    >    
    >    --
    >    Principal, Evariste Systems LLC (www.evaristesys.com)
    >    
    >    Sent from my Google Nexus.
    >    _______________________________________________
    >    VoiceOps mailing list
    >    VoiceOps at voiceops.org
    >    https://puck.nether.net/mailman/listinfo/voiceops
    >    
    
    
    -- Alex
    
    --
    Principal, Evariste Systems LLC (www.evaristesys.com)
    
    Sent from my Google Nexus.