[VoiceOps] Multicast Paging Device

[Ball, Jared]

The newer Polycom Phones support multicast paging.  It is my understanding that they re-used some of the technology from Spectra link to do this.    The Valcom VIP-801a has a special firmware that can receive Polycom’s multicast page and send it to your amplifier.  David Ellison is the guy at Valcom that you’ll want to talk to about that firmware.  The firmware allows you to configure a VIP-801a to receive multiple Polycom paging groups.  If your customer has multiple zones they’ll probably want a separate VIP-801a for each zone.  

Regards,
Jared Ball
CDK Global 
NextGen Voice  - Hosted Voice Engineer


On 3/23/17, 1:55 PM, "VoiceOps on behalf of Robert Johnson" <voiceops-bounces at voiceops.org on behalf of robert.j at bendtel.com> wrote:

    Does anyone have recommendations on a SIP Multicast paging device that 
    would connect to a pre-existing paging amplifier.
    _______________________________________________
    VoiceOps mailing list
    VoiceOps at voiceops.org
    https://puck.nether.net/mailman/listinfo/voiceops
    


----------------------------------------------------------------------
This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, notify the sender immediately by return email and delete the message and any attachments from your system.