[VoiceOps] VoIP Testing
shripald at gmail.com
Wed May 24 10:43:01 EDT 2017
Thanks! Going to check it out!
On Wed, May 24, 2017 at 10:42 AM Christopher Aloi <ctaloi at gmail.com> wrote:
> You can use a USB to ethernet dongle on a raspberry pi to bring up two
> NICs. I have a VoIP monitor capture node in our lab built this way and it
> works well.
> On Tue, May 23, 2017 at 5:21 PM Shripal Daphtary <shripald at gmail.com>
>> Mark, what type of device are you using as the sensor?
>> I've been looking for a raspberry pi with two Ethernet interfaces but I
>> can't seem to find one.
>> I'm assuming we need on port for port mirror traffic and one for internet
>> access to send the data back to voipmonitor.
>> > On May 23, 2017, at 3:49 PM, Mark Wiater <mark.wiater at greybeam.com>
>> >> From time to time we have some remote clients who are facing voice
>> quality issues on their endpoints and I have no real good way of
>> troubleshooting or pin pointing the problem.
>> > While it's not completely free, I couldn't live without voipmonitor for
>> this very use. I install a sensor in the client network on a mirror port or
>> on the phone system and get to see exactly what they see, from a voip
>> > The collection software is open source but the gui is invaluable.
>> > _______________________________________________
>> > VoiceOps mailing list
>> > VoiceOps at voiceops.org
>> > https://puck.nether.net/mailman/listinfo/voiceops
>> VoiceOps mailing list
>> VoiceOps at voiceops.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the VoiceOps