[VoiceOps] ATAs compatible with fire alarm panels

Aaron C. de Bruyn aaron at heyaaron.com
Tue Dec 15 16:55:30 EST 2020

I've used these in a few situations:

They are PoE, so you can power them from your infrastructure.  We have a
few UPS units in offices that keep switches and the router up for voice
traffic, and this device gets powered right along with it.

The down-side is that they might not be updating the firmware anymore, and
the devices are kinda kludgy to configure.


On Tue, Dec 15, 2020 at 1:36 PM Camille Issa <camille at alianza.com> wrote:

> Hello all – looking for recommendations (other than keeping the analog
> line) for VoIP ATA’s that are compatible with fire alarm panels. Anyone got
> a good working solution out there?
> Camille Issa | Vice President, Sales
> * Alianza – The Cloud Communications Platform Company*
> Call Or *Text* 919-229-4040 | camille at alianza.com
> Alianza <http://www.alianza.com/> | Blog
> <http://www.alianza.com/call-to-the-cloud> | LinkedIn
> <http://www.linkedin.com/company/alianza> | Twitter
> <http://www.twitter.com/alianza_inc>
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/voiceops/attachments/20201215/d2bc7d14/attachment.htm>

More information about the VoiceOps mailing list