[VoiceOps] More Question about routing

Dave Frigen dfrigen at wabash.net
Wed Sep 9 11:50:12 EDT 2020


OK, hot off the press from ATIS, the U.S. SHAKEN General Authority….

 

Nothing has changed in the STIR/SHAKEN application process. Each service provider (SP) will need to apply through the PA to be able to participate in the SHAKEN ecosystem. The FCC is recently concerned because several providers using wholesale number pools to operate today are now applying for numbers out of the national pool. 

 

Actually acquiring numbers out of the national pool is not necessary. The only current numbering pool requirement is that you are a national or state registered SP that HAS ACCESS TO NATIONAL NUMBER POOLS (you don’t actually need to possess any of your own numbers…..continue to use wholesale resources to operate).

 

So in closing, you do not need your own phone numbers to operate. You just need federal or state permission to access the national number pool as one of the credentials and qualifiers to become a registered SP with the PA.

 

Dave  

 

From: VoiceOps <voiceops-bounces at voiceops.org> On Behalf Of Zilk, David
Sent: Tuesday, September 8, 2020 4:20 PM
To: voiceops at voiceops.org
Subject: [VoiceOps] More Question about routing

 

Having come into telephony from the data networking end, rather than from a PSTN telephony background, where would one find a good  basic to detailed tutorial of how routing of VoIP calls into the PSTN and vice versa works?  

 

I have so far only been involved with routing from our SIP platform to and from wholesale service providers, and have not yet had to manage our own numbers and peering. With STIR/SHAKEN we may need to get into that, and I need to get up to speed.

 

Thanks,

David

 

From: VoiceOps [mailto:voiceops-bounces at voiceops.org] On Behalf Of Richard Jobson
Sent: Tuesday, September 8, 2020 12:44 PM
To: Glen Gerhard <glen at cognexus.net <mailto:glen at cognexus.net> >; voiceops at voiceops.org <mailto:voiceops at voiceops.org> 
Subject: Re: [VoiceOps] Question about SS7 routing

 

Hi Ross

 

So in your original email you were wondering about the role of MTP, the layer 3 protocol. This keeps tabs on the point codes. If you are troubleshooting down to the SS7 messages (MSU’s), SLTM’s & SLTA’s tell you what point codes those links are reaching.

 

The Global Title Translation uses the SCCP/SS7 protocol when connecting to IXC.

 

Local Number Portability uses AIN/TCAP to dip the database to determine the LRN. But many SS7 operations just troubleshoot this by looking at the ISUP protocol where the original calling Party number (CGN) appears in the Generic Address Part GAP and the LRN in the called party number (CDN) field.

 

Cheers

Richard

 

                                                                                                                                                                                                            

From: VoiceOps <voiceops-bounces at voiceops.org <mailto:voiceops-bounces at voiceops.org> > on behalf of Glen Gerhard <glen at cognexus.net <mailto:glen at cognexus.net> >
Date: Tuesday, September 8, 2020 at 11:47 AM
To: <voiceops at voiceops.org <mailto:voiceops at voiceops.org> >
Subject: Re: [VoiceOps] Question about SS7 routing

 

Hi Ross,

Unless you have an SS7 trunk to an ILEC you don't need to worry much about the Point Code. For SIP traffic you just dip the call and route on the LRN.

The Point Code itself is a special format that is assigned to you when you set up your SS7 capable switch. Unless you have one of them you never need to worry about it.

========

ANSI Point Codes
ANSI point codes are made up of three groups of digits called the network indicator (NI), network cluster (NC), and network cluster member (NCM). The values for ANSI point codes depends on the value of the pctype parameter of the chg-sid command, either ansi or other. If the pctype parameter is set to ansi, the ANSI rules for the ANSI point code are used to define the point code. The range of values for an ANSI point code with the pctype=ansi parameter are:

NI – 001-255
NC – 001-255 (if ni = 001-005) or 000-255, * (if ni = 006-255)
NCM – 000-255, *
The pctype=other parameter specifies that the ANSI point codes do not meet ANSI standards. The range of values for ANSI point codes with the pctype=other parameter are:

NI – 000-255
NC – 000-255, *
NCM – 000-255, *
The asterisk (*) point code value indicates a single cluster address for a cluster point code (for example, 20-2-*) or a network routing destination (21-*-*). for more information on cluster point codes, see the Cluster Routing and Management Diversity (CRMD) section. For more information on network routing point codes, see the Network Routing section.

A double asterisk (**) and triple asterisk (***) can also be used for the NC and NCM fields of the ANSI point code, but for only the rtrv-dstn, rept-stat-dstn, rtrv-rte, and rept-stat-rte commands.

A double asterisk in the NCM field of a point code (for example, 20-2-**) produces a summary report that shows all point code destinations or routes residing in the given cluster (20-2). This does not include the cluster point code, if the cluster point code (for example, 20-2-*) is provisioned. The following examples (rtrv-dstn and rtrv-rte) are reports generated using two asterisks in the NCM field of a point code.
=======

~Glen

On 9/3/2020 10:55 AM, Mary Lou Carey wrote:

I'll try to make this as short and sweet as possible even though it's pretty complicated. Point Codes are the 10 digit addresses for a particular switch and LRNs are the 10 digit addresses for a particular connection point that switch is associated with. In the PSTN world, all connections are dedicated and implemented by LATA / Tandem area for Local / IntraLATA traffic. When you get your first NPA-NXX for a LATA / tandem area, you enter it in the LERG (National Routing Database) and populate the tandems (Local, IntraLATA and FGD) that you are connecting to. Then you assign a 10 digit phone number from your NXX block to be your LRN. You add that to both the LERG and NPAC (National Porting Database). 

Once you've published all your switch information in the LERG and NPAC, then you establish your ISUP trunks with each ILEC you're interconnecting with. You can set up additional trunks with other carriers if you want a cheaper option for routing traffic, but the minimum required is the ILEC. Each carrier's switch will have a distinct point code associated with it so you'll order ISUP trunks to each switch (point code route) you need to be connected to. You'll also associate the distinct LRN for that LATA / carrier tandem area with that trunk group. Usually there's multiple trunk groups per LATA / tandem area so you'll program your routing tables with the NPA-NXXs each trunk group serves. That way when a customer originates a call, your switch can do the LNP dip to find the LRN and send it over the route that the NPA-NXX of the LRN is associated with.  Routing tables can get complicated depending on how many carriers you're connected to. Companies that operate in more than one ILEC area or LATA usually purchase Least Cost Routing software so they can send their originating traffic out over the cheapest route. 

IXC traffic is routed a little differently because it is routed by CIC (4 digit code that identifies the IXC) rather than by NPA-NXX. They connect to all the ILEC carriers just like the CLECs do, but they populate their routing information in the SMS database instead of the NPAC database. Once the call is dipped, the traffic is delivered in pretty much the same way.....by dedicated trunk group / tandem area. 



MARY LOU CAREY 
BackUP Telecom Consulting 
Office: 615-791-9969 
Cell: 615-796-1111 

On 2020-09-02 04:46 PM, Ross Tajvar wrote: 

Hi all, 

I'm trying to understand how routing works in SS7-land. I am familiar 
with portability, and I know (at least in the US) the first step in 
routing a call is doing an LNP dip to get the LRN. 

However, it looks like addresses in MTP3 are "point codes" (PCs) which 
are assigned to switches. Calls are set up with ISDN-UP, which is 
transported via MTP3. So in order for a call to be set up, the 
destination switch's PC must be known. How is the destination PC 
determined from the destination LRN? 

Thanks, 
Ross 
_______________________________________________ 
VoiceOps mailing list 
VoiceOps at voiceops.org <mailto:VoiceOps at voiceops.org>  
https://puck.nether.net/mailman/listinfo/voiceops <https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailman_listinfo_voiceops&d=DwMFaQ&c=N13-TaG7c-EYAiUNohBk74oLRjUiBTwVm-KSnr4bPSc&r=VcRLyVxkyGds34uxiPM944HQvaWq-nynyZXfNpSfhOs&m=lSYJuWWkYAlbnO78O2t9H5EFCSIB6SJj1gm-aOb9Fdo&s=3SjT12Q2cxk_W6Sobks1FC_1xSqAsJ07kA4ehuB4fRY&e=>  

_______________________________________________ 
VoiceOps mailing list 
VoiceOps at voiceops.org <mailto:VoiceOps at voiceops.org>  
https://puck.nether.net/mailman/listinfo/voiceops <https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailman_listinfo_voiceops&d=DwMFaQ&c=N13-TaG7c-EYAiUNohBk74oLRjUiBTwVm-KSnr4bPSc&r=VcRLyVxkyGds34uxiPM944HQvaWq-nynyZXfNpSfhOs&m=lSYJuWWkYAlbnO78O2t9H5EFCSIB6SJj1gm-aOb9Fdo&s=3SjT12Q2cxk_W6Sobks1FC_1xSqAsJ07kA4ehuB4fRY&e=>  

 

-- 
Glen Gerhard
glen at cognexus.net <mailto:glen at cognexus.net> 
858.324.4536
 
Cognexus, LLC
7891 Avenida Kirjah
San Diego, CA 92037

_______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org <mailto:VoiceOps at voiceops.org>  https://puck.nether.net/mailman/listinfo/voiceops 

  _____  

This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, notify the sender immediately by return email and delete the message and any attachments from your system.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/voiceops/attachments/20200909/9db11b1c/attachment.htm>


More information about the VoiceOps mailing list