<HTML>
<HEAD>
<TITLE>PGW 2200 version 9.8.1 - C7-Link</TITLE>
</HEAD>
<BODY>
<FONT FACE="Calibri, Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'>Hi All<BR>
<BR>
What I need to know:<BR>
Does the newer PGW 9.8.1 software allow one to configure one C7-Linkset connecting via AS5400XM gateway “A” to signal for media links that are connecting via a different AS5400XM gateway “B”<BR>
Media links on both AS5400XM gateways A & B are connecting to the same “Media Transfer Point”<BR>
<BR>
I know for a fact that previous PGW 2200 versions ie. 9.5.2 could not support this without the use of “ITP” ( </SPAN></FONT><FONT SIZE="1"><FONT FACE="Arial"><SPAN STYLE='font-size:9pt'>Cisco IP Transfer Point - LinkExtender ).<BR>
<BR>
This would simplify configuration and and allow for much less C7 Signaling links<BR>
<BR>
I unfortunately cannot test this in the Lab as we do not have enough equipment to simulate this.<BR>
<BR>
Thanks<BR>
<BR>
Albert<BR>
<BR>
</SPAN></FONT></FONT><FONT FACE="Calibri, Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'><BR>
</SPAN></FONT><BLOCKQUOTE><FONT FACE="Calibri, Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'><BR>
</SPAN></FONT></BLOCKQUOTE>
<FONT face=Verdana size=1>Please note: This email and its content are
subject to the disclaimer as displayed at the following link </FONT><A
href="http://www.is.co.za/legal/E-mail+Confidentiality+Notice+and+Disclaimer.htm"><FONT
face=Verdana
size=1>http://www.is.co.za/legal/E-mail+Confidentiality+Notice+and+Disclaimer.htm</FONT></A><FONT
face=Verdana size=1>. Should you not have Web access, send an email to </FONT><A
href="mailto:disclaimers@is.co.za"><FONT face=Verdana
size=1>mailto:disclaimers@is.co.za</FONT></A><FONT face=Verdana size=1> and a
copy will be sent to you.</FONT>
</BODY>
</HTML>