<div dir="ltr">Anyone have a tool that a technician or customer could put on a computer on a customer's network, and it will tell them if a SIP ALG was disabled or enabled? Or if their network was suitable for SIP traffic?<div><br></div><div>We started deploying some Ubiquiti Unifi USG routers, and discovered that they had SIP ALG enabled by default.</div><div><br>Typically we just put the Polycom VVX phones to register with TCP for signaling, and this bypasses most SIP ALGs as I think most can only handle SIP using UDP and not TCP right?</div><div><br></div><div>Well I guess the SIP ALG used in the Ubiquiti Unifi USG does modify even SIP using TCP. I know Ubiquiti Unifi USG use a fork of the vyatta operating system, and the command to disabled it is <span style="color:rgb(51,51,51);font-size:14px">set system conntrack modules sip disable</span></div><div><br></div><div>We were able to turn SIP ALG off, and now everything is working fine.</div><div><br></div><div>Would be great if there was a tool a low level tech or customer could use to test the network?</div><div><br></div><div><br></div></div>