<div dir="ltr">I receive a majority of traffic via remote call forwarding from mobile carriers. A small number of subscribers, or specific callers to those subscribers, experience broken calls. The symptoms vary, but they are media related:<br>Callers hear rings then silence.<div>Callers hear rings then beeps, or busy tones.</div><div>Callers hear continuous ringing.</div><div>Callers hear rings then call drops; not sure if this report is the same as first, not everyone checks if the call duration is still incrementing.</div><div><br></div><div>We are receiving these calls via SIP, and in all of the above cases we received the call and signaled a brief ringing (180 w/o SDP) followed by a recorded greeting (200 OK w/SDP). Sometimes we hear the caller, sometimes only line noise, sometimes no RTP at all or silent RTP (all binary 1).</div><div><br></div><div>One hypothesis is these calls are failing due to the change in media from the mobile carrier's ringing to our greeting. It's a terrible experience for our subscribers to be told this is a problem with their mobile carrier's call forwarding, or the original calling carrier, or some carrier in between.</div><div><br></div><div>I'm curious if others have experienced this, and if they were able to mitigate it from the terminating side via signaling, (UPDATE or re-INVITE, repeating our original SDP), or if this has to be fixed upstream.</div><div><br></div></div>