Re: [nsp] Using Viking Flash ATA disks in C12000?

From: Robert E. Seastrom (rs@seastrom.com)
Date: Mon Apr 29 2002 - 23:24:10 EDT


what version of ios do you have in the bootflash? it depends on taht too.

"KF" <kf@reign.sk> writes:

> hmmm yup....perhaps not every sizes .. e.g. dependet on the ios... Last time, here was an discussion about utilizing ATA diskflash
> on 3640... Mine didn't recognize "original" 48MB diskflash ....which runs at VXR...
>
> did you tryed zycko?
>
>
> cheers
>
> alex
> > -----Original Message-----
> > From: Jonas Stenling [mailto:jonas@stenling.nu]
> > Sent: Monday, April 29, 2002 2:41 PM
> > To: cisco-nsp@puck.nether.net
> > Subject: RE: [nsp] Using Viking Flash ATA disks in C12000?
> >
> >
> > On Mon, 29 Apr 2002, KF wrote:
> >
> > > hmm what is your price for that flash disk? Maybe is
> > relevant to look for 3rd party distributors of Cisco "certified"
> > > memoy/cables/gbic products...
> >
> > Around $100, which is way less than what you pay for
> > "certified" disks. As
> > far as I know Flash ATA is a standard so any disk should work, right?
> >
> > --
> > Visit: http://www.stenling.nu/contact.html for contact info.
> > EOF
> >
> >
> >



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:11:55 EDT