Re: [nsp] cabling between AUX port and CON port

From: David Wilde (dwilde@aapt.com.au)
Date: Thu Jul 04 2002 - 03:53:21 EDT


Hi Christophe,

Try putting config something like this on the aux port of your router:

        line aux 0
         modem InOut
         no exec
         transport input telnet
         escape-character BREAK
         stopbits 1
         flowcontrol hardware

Do a 'show line' to see which line your AUX port is; add 2000 to this to get the port to telnet to.

David

>>> "odusseus" <odusseus@voila.fr> 07/04/02 05:41pm >>>
Hi all,

I am trying to do this:

+------+ AUX port con port +--------+
|router|-----------------------|catalyst|
+------+ console cable +--------+

The Cisco 6500 Catalyst has a console/auxiliary port via RJ-45 (female) data terminal equipment (DTE) for local or remote connectivity.

The Cisco 1750 Series router has a RJ-45 jack with RS232 interface (plug compatible with Cisco 1000/1600/2500 series console ports); asynchronous serial DTE; transmit/receive rates up to 115.2 kbps (default 9600 bps, not a network data port); no hardware handshaking such as RTS/CTS.

Then I checked the pinout of these interfaces described here
http://www.cisco.com/warp/public/779/smbiz/service/knowledge/pinouts/ios_conaux.htm

From this document, www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_c/xtocid850646 it appears that the auxiliary port does not use Ready to Send/Clear to Send (RTS/CTS) handshaking for flow control.

So we don't need to carry the signal on pin1 & pin8 from the AUX port.

Therefore I imagined that I could interconnect this two ports via a rolle over (console) cable.

But it seems that I am wrong and I don't see why:

From the router I tried to get connected to the swicth via its aux port and I got this where 10.0.0.1 is corresponding to its own interfaces:
------------
router# telnet 10.0.0.1 port 2000
trying 10.0.0.1, 2000 ...

% Connection refused by remote host
-------------

I also tried different port 2001...2004, 4001...4004, with the same result:connection refused by remost host.

So if you have any suggestion you are more than welcome.

Thank you.

Christophe
____________________________________________________________
Faites un voeu et puis Voila ! www.voila.fr
Avec Voila Mail, consultez vos e-mails sur votre mobile Wap.



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:03 EDT