APS
On Wed, Jul 10, 2002 at 02:12:23PM -0700, Juan wrote:
> I just noticed that we can configure duplicated ip
> address on serial interfaces like this:
>
> !
> interface Serial0/0
> ip address 192.0.9.1 255.255.255.0
> !
> interface Serial0/1
> ip address 192.0.9.1 255.255.255.0
> !
>
> The routing table shows two routes and it will load
> balance the outbound packets
>
> ...
> C 192.0.9.0/24 is directly connected, Serial0/1
> is directly connected, Serial0/0
>
> Why is this allowed? I tried this on p2p ATM
> interface, it complained about overlapping
> address(which sounds right to me). Is there any
> legitimate use for this?
>
> Thanks
> Juan
>
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Sign up for SBC Yahoo! Dial - First Month Free
> http://sbc.yahoo.com
-- Jared Mauch | pgp key available via finger from jared@puck.nether.net clue++; | http://puck.nether.net/~jared/ My statements are only mine.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:04 EDT