Employees isdn modems
1
T1/pri (pvc)
2
3
each employee has a pvc(vp/vc) configured for every isdn modem installed on
their premises. Now, the problem is:
employees make LD's and since the pvc's are bought by my company bills
report that, they originate at my 3640.
is their a way by which
1. I can stop any type of voice traffic on my 3640? I know that I can ask
the telco to stop that but that will cost me extra 20 bucks per employee per
mth.
2. or I can get the actual originator of the LD?
Thanks,
phoram mehta
-----Original Message-----
From: Tatsuya Kawasaki [mailto:tatsuya@kivex.com]
Sent: Friday, November 16, 2001 6:39 AM
To: Mehta, Phoram
Subject: Re: [nsp] dial-in config with 3640
bit confused..
So I assume that you got 3600 router is acking as an access server.
so what is CPE gears??? cisco 800 ?
Give me a diagram and explain how they are making LD via ISDN.
I, too, have ISDN line to my work and in order me to make LD, I had to
configure my router to convert digital to analog so that I can use
analog line. . you can always block such a call by asking tele phone
company as well...
Tatsuya
/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
Tatsuya Kawasaki
Allegiance Telecom
Unlock the Power of the Internet
http://www.kivex.com
Phone 301.215.6777 Fax 301.215.5991
Affiliation given for identification not representation
/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
On Thu, 15 Nov 2001, Mehta, Phoram wrote:
>
> I have a 3640, which controls the dial-in for our tele/home workers. Is
> there a way by which I can stop them making long distance/international
> calls using those lines? They are isdn lines.
> Can i configure the router to only accept calls and to allow them to use
> only the company resources but not to make any calls?
>
> Thanks,
>
> Phoram Mehta
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:24 EDT