Re: [nsp] Dialup modem to serial port configuration

From: Robert E. Seastrom (rs@seastrom.com)
Date: Tue Mar 26 2002 - 07:42:56 EST


"Edward S. Desouza" <edward_desouza@yahoo.com> writes:

> Hello,
> am trying to conenct a PSTN modem to a V.35 serial
> port. Have any of you configured a PSTN modem to
> conenct in this fashion ? I wanted to know the AT
> string on the PSTN modem and if any additional config
> that needed to be put on the serial port.

In the absence of more specific information (such as modem
manufacturer and model) I would guess that a synchronous modem
autodials with V.25bis rather than the AT command set.

Unless it's really old hardware you probably aren't goingg to
experience the joys of RS-366 (out of band dialer control).

                                        ---rob



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:38 EDT