On Mon, 24 Jan 2000 04:32:50 -0500
"Desmarais, Jonathan" <JDesmarais@colt-telecom.com> wrote:
> 2. The same 6509 have two Supervisor modules, each of which has an MSFC
> router card attached. All devices are connected to a management LAN lets
> call it A. They are either directly connected or through a common Vlan which
> is part of the same LAN. All are accessed via the LAN A address by snmp,
> except the MSFC cards. The are being sourced by their public addresses, the
> addresses we configured first. I though perhaps Ciscoworks was accessing the
> first address in the config, however that is not the case. Is their
> something that can be configured in CISCO works or the router cards that
> will enable us to access the LAN A address for snmp queries?
Add an interface to the MSFC router engines onto LAN A.
Regards,
Neil.
-- Neil J. McRae C O L T I N T E R N E T neil@COLT.NET
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:09 EDT