On a Catalyst 6500(or C7600) ,with Supervisor 2 and one switch-fabric
module, what path(s) will be used by 6516* fabric-enabled-gigabit cards , no
DFC, to forward frames ?
( ) switch-fabric only
( ) switch-fabric (main) and bus, active-standby, only one path active
( ) switch-fabric and bus, active-active, both paths used even with low
loads
( ) switch-fabric (main) and bus, active-active, both paths used if load
exceeds threshold
Rubens Kuhl Jr.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:35 EDT