Re: [nsp] E-BGP between PE-CE and loopback Address

From: Manpreet Singh (singh@ispsoft.com)
Date: Fri Dec 14 2001 - 14:56:27 EST


It is not multi-hop BGP. E-BGP is between directly connected PE-CE.
This unreachability is also seen in the case of RIP, when the serial interface
has ip unnumbered command and borrows the IP address from the loopback
interace.

-Manpreet

Scott Whyte wrote:

> On Fri, 14 Dec 2001, Manpreet Singh wrote:
>
> > Hi all,
> > i have E-BGP configured on the PE and the CE. PE-CE link is a serial
> > link with frame-relay encapsulation (Static PVC configured).
> > Also, on both PE and CE, we have loobbacks configured with host IP
> > addresses from /30. The problem is that the CE and PE are not reachable
> > from each other. Can anyone suggest why ?
>
> Are you peering from the loopbacks? If yes are you using ebgp multihop?
>
> >
> > It's urgent,
> >
> > -Thanks in advance.
> >
> > Manpreet
> >



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:57 EDT