Hi!
Stupid Question first .. the Loopback on the PE does it belong to the same
VRF than the Serial Link ?
>From the CE can you Ping the PE Loopback ...
Would also be helpful if you could post some parts of the config including a
sh ip route vrf <yourVRFName>
Cheers,
Chris
-----Ursprüngliche Nachricht-----
Von: Manpreet Singh [mailto:singh@ispsoft.com]
Gesendet: Freitag, 14. Dezember 2001 20:56
An: Scott Whyte
Cc: cisco-nsp@puck.nether.net
Betreff: Re: [nsp] E-BGP between PE-CE and loopback Address
It is not multi-hop BGP. E-BGP is between directly connected PE-CE.
This unreachability is also seen in the case of RIP, when the serial
interface
has ip unnumbered command and borrows the IP address from the loopback
interace.
-Manpreet
Scott Whyte wrote:
> On Fri, 14 Dec 2001, Manpreet Singh wrote:
>
> > Hi all,
> > i have E-BGP configured on the PE and the CE. PE-CE link is a serial
> > link with frame-relay encapsulation (Static PVC configured).
> > Also, on both PE and CE, we have loobbacks configured with host IP
> > addresses from /30. The problem is that the CE and PE are not reachable
> > from each other. Can anyone suggest why ?
>
> Are you peering from the loopbacks? If yes are you using ebgp multihop?
>
> >
> > It's urgent,
> >
> > -Thanks in advance.
> >
> > Manpreet
> >
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:57 EDT