c7200-ik9o3s-mz.122-3.bin will fix it. -anchi
-----Original Message-----
From: Cliff Judge [mailto:cliff@broccoli.cidera.com]
Sent: Friday, January 04, 2002 10:35 AM
To: jlewis@lewis.org
Cc: Jordi Bruguera; cisco-nsp@puck.nether.net
Subject: Re: [nsp] Cisco 7204 VXR Fast Ethernet lock up after
reconfiguration
I've had a recent problem with a 7206VXR with NPE-300 where the FastE
ports stop transmitting. It seems to happen after a spurious memory
access. A shut/no shut will occasionally get the FastE to startt
transmitting again if the interface is kept down for two minutes or
more. Reloading the router is unfortunately the only sure solution. I am
running 12.1(7).
On Fri, 4 Jan 2002 jlewis@lewis.org wrote:
> On Fri, 4 Jan 2002, Jordi Bruguera wrote:
>
> >
> > Hello.
> >
> > I'm having trouble with a Cisco 7204 VXR.
> > [NPE-225, 256 MB RAM, Dual FE, 1 ATM PORT, 4 Serial]
> >
> > Sometimes when you save the configuration to
> > memory, one of the two FastEthernet devices
> > becomes silent. Sometimes you get rid of
> > this issuing "shut-no shut" in the device, but
> > sometimes you have to "reload" the entire router.
> ...
> > and upgraded the IOS to:
> > IOS (tm) 7200 Software (C7200-IS-M), Version 12.2(4)T1,
> > RELEASE SOFTWARE(fc1)
> >
> > ... and still the same. Anyone has seen something similar
> > out there ?
>
> My guess would be IOS bug. I've seen the same sort of thing (any
access
> to flash might shut down PA-T3 ports) early in the 12.0S train.
Sometimes
> a shut/no shut would fix it...sometimes a reboot. What other versions
> have you tried? Do you really need to be running 12.2T code?
>
> --
> ----------------------------------------------------------------------
> Jon Lewis *jlewis@lewis.org*| I route
> System Administrator | therefore you are
> Atlantic Net |
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
>
-%
|Cliff Judge Network Engineer|
|301-561-2866 Cidera, Inc |
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:58 EDT