[nsp] undesirable trafice

From: pankaj (pankaj@worldgatein.net)
Date: Wed Feb 13 2002 - 11:05:26 EST

Next message: Jared Mauch: "Re: [nsp] CSCdw65903"
Previous message: Przemyslaw Karwasiecki: "[nsp] route-map logic"
Next in thread: Douglas M. Todd, Jr.: "RE: [nsp] undesirable trafice"
Reply: Douglas M. Todd, Jr.: "RE: [nsp] undesirable trafice"
Maybe reply: pankaj: "[nsp] undesirable trafice"
Reply: Douglas M. Todd, Jr.: "RE: [nsp] undesirable trafice"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

cisco catalyst2612XL Switch
|fastethernet0/7
|
rotuer fastehternet0/0

Here router's ethernet port is dircetly connected with switch's 0/7
port using dlink cat5ethernet cable(RJ-45)

now my router ethernet showing input rate 100000 bits/sec
and at the same time on switch fastehternet0/7 showing output rate
251000 bits/sec
Since from last one or two hours this is happening....

How this can happen ,, ,,,,,,,,,,,,,
any ideas will help me...

----pankaj

Next message: Jared Mauch: "Re: [nsp] CSCdw65903"
Previous message: Przemyslaw Karwasiecki: "[nsp] route-map logic"
Next in thread: Douglas M. Todd, Jr.: "RE: [nsp] undesirable trafice"
Reply: Douglas M. Todd, Jr.: "RE: [nsp] undesirable trafice"
Maybe reply: pankaj: "[nsp] undesirable trafice"
Reply: Douglas M. Todd, Jr.: "RE: [nsp] undesirable trafice"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:04 EDT