Re: [nsp] OT: Tunnel over my router

From: Jared Mauch (jared@puck.nether.net)
Date: Sat Feb 23 2002 - 13:58:30 EST


        You can turn on netflow and look in "sh ip ca flow"
for GRE/ipip packets.

        If there is a lot of data in the tunnel you can find it very
fast :)

        - Jared

On Sat, Feb 23, 2002 at 07:35:53PM +0100, Peter Burggasser wrote:
> Hello
>
> How can i find a tunnel over my router. At the docus are no hints, but
> correct me if i'm wrong. To set a tunnel is very easy on both side, but
> what's about the routers between ? How could i prevent them. The tunnel
> has no ip address so there is no entry at the routering table where i
> can see, that these are tunneld. Thanks for your efforts
>
> Peter Burggasser

-- 
Jared Mauch  | pgp key available via finger from jared@puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:05 EDT