Re: [nsp] Router ID

From: Sharif Torpis (faust@grift.com)
Date: Fri Mar 29 2002 - 15:30:19 EST

Next message: Cisco Systems Product Security Incident Response Team: "[nsp] UPDATED: Cisco Security Advisory: LDAP Connection Leak in CTI when User Authentication Fails"
Previous message: sthaug@nethelp.no: "Re: [nsp] Router ID"
In reply to: Dhiman Barman: "[nsp] Router ID"
Next in thread: Dhiman Barman: "[nsp] Router ID"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

It must be your first loopback interface then.

Regards,
Sharif

On Fri, 29 Mar 2002 14:43:36 -0500, Dhiman Barman wrote:
>Hi,
>I have a router will the following interface addresses:
>
>192.168.2.1/24
>172.16.11.1/24
>10.0.3.200/24
>
>I configured OSPF, and the Router ID is 10.0.3.200. The documents
>say that Router ID is the highest interface IP address. How
>does 10.0.3.200 turn out to be the highest interface IP ?
>
>-Dhiman
>
>

Next message: Cisco Systems Product Security Incident Response Team: "[nsp] UPDATED: Cisco Security Advisory: LDAP Connection Leak in CTI when User Authentication Fails"
Previous message: sthaug@nethelp.no: "Re: [nsp] Router ID"
In reply to: Dhiman Barman: "[nsp] Router ID"
Next in thread: Dhiman Barman: "[nsp] Router ID"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:10 EDT