RE: [nsp] Cisco remote ping.

From: Sergio Ramos (sramos@gibnet.net)
Date: Tue Apr 23 2002 - 09:03:56 EDT


Hi!

The Ping MIB is quite helpful, we use it from a Perl script to gather
information for MRTG and provide some sort of service level agreement
statistics for our customers showing round trip times and packet loss.
However, I don't think you can specify the source address.

http://www.cisco.com/warp/public/477/21.html

CiscoPingEntry ::= SEQUENCE {
    ciscoPingSerialNumber INTEGER,
    ciscoPingProtocol CiscoNetworkProtocol,
    ciscoPingAddress CiscoNetworkAddress,
    ciscoPingPacketCount INTEGER,
    ciscoPingPacketSize INTEGER,
    ciscoPingPacketTimeout INTEGER,
    ciscoPingDelay INTEGER,
    ciscoPingTrapOnCompletion TruthValue,
    ciscoPingSentPackets Counter,
    ciscoPingReceivedPackets Counter,
    ciscoPingMinRtt INTEGER,
    ciscoPingAvgRtt INTEGER,
    ciscoPingMaxRtt INTEGER,
    ciscoPingCompleted TruthValue,
    ciscoPingEntryOwner OwnerString,
    ciscoPingEntryStatus RowStatus,
    ciscoPingVrfName OCTET STRING
    }

Be careful! You need to set up a RW SNMP password on your device.

Sergio.

-----Original Message-----
From: Diego Costa [mailto:diego.costa@ifxnw.com.uy]
Sent: 22 April 2002 18:32
To: cisco-nsp@puck.nether.net
Subject: RE: [nsp] Cisco remote ping.

We are doing it with a perl script and snmp, i don't know if exist any tool
thats do it.

-----Original Message-----
From: Peter suwa [mailto:wclhung@yahoo.com]
Sent: Lunes, 22 de Abril de 2002 01:02 p.m.
To: cisco-nsp@puck.nether.net
Subject: [nsp] Cisco remote ping.

Hi there,
     Anyone can advise what tools can initiate remote
ping on Cisco router with specify ip address of source
interface to destination ?

Thanks
:)

__________________________________________________
Do You Yahoo!?
Yahoo! Games - play chess, backgammon, pool and more
http://games.yahoo.com/



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:13 EDT