RE: [nsp] tacacs ppp

From: Kinczli Zoltán (Zoltan.Kinczli@Synergon.hu)
Date: Tue Oct 09 2001 - 04:08:43 EDT


Hello,
 
  You define an authentication method to do nothing:
 
!
aaa authentication ppp do-nothing none
!
 
on the serial line you configure
 
ppp authentication <chap/pap> do-nothing
 
 
--Z.

-----Eredeti üzenet-----
Feladó: akber [mailto:mirzaakber@yahoo.com]
Küldve: 2001. október 8. 21:24
Címzett: cisco-nsp@puck.nether.net
Tárgy: [nsp] tacacs ppp

HI,
I am running ppp encapsulation over a Lease line. I have a Tacacs server
at my cetral office for ppp autheentication for asyn dial user.
If i run hdlc on serial link its up but if i change to ppp it gives me
serial is up, line protocol is down. When i started debug ppp
authentication is says authentication failure.
 
So what i need to know :- how i make serial link to by-pass ppp
authentication from tacacs.
or
i configure some authenticatiob so that links gets authnenticaticated
from tacacs.
 
some aaa commands to bypass this.
I have alredy tried with chap pap and not much benefit.
 
Thanks
Akber
 
 



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:19 EDT