Re: Setting distance on statics to connected next-hops

From: Ryan O'Connell (ryan@complicity.co.uk)
Date: Tue Oct 23 2001 - 04:33:14 EDT


On Tue, Oct 23, 2001 at 04:21:12AM +0100, Martin Cooper wrote:
> I have three routers, each of which has directly-connected
> interfaces to a Vlan812 and a static pointing to a connected
> next-hop out of that interface. The statics on two of the
> routers (down-3 & cent-8) have their admin distances set to
> 200. Vlan812 is up on all the routers. The statics are covered
> by OSPF 'network' statements, and also redistributed as external
> type E1 routes.

[snip]

The admin distance of you've set on your statics (200) is higher
than the admin distance of OSPF, so OSPF will be preferred. It
looks like down-3 isn't learning the OSPF route for some reason.

-- 
         Ryan O'Connell - CCIE #8174
<ryan@complicity.co.uk> - http://www.complicity.co.uk

I'm not losing my mind, no I'm not changing my lines, I'm just learning new things with the passage of time



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:20 EDT