[c-nsp] "show platform hardware capacity" shows sup720-3b FIB tableat 98%

[Jared Mauch]

On Thu, Oct 19, 2006 at 07:49:35PM +0100, Euan Galloway wrote:
> On Thu, Oct 19, 2006 at 03:05:46PM +0100, Colin Whittaker wrote:
> 
> > You can configure the number of IPv4 routes or the number of MPLS routes
> > but not the number of IPv4 + MPLS routes.
> > 
> > So instead of getting:
> >  IPv4                - 239k
> >  MPLS                - 1k (default)
> > I would like to have 
> >  IPv4 + MPLS         - 240k 
> 
> http://puck.nether.net/pipermail/cisco-nsp/2006-August/032846.html
> 
> mls cef maximum-routes ipv6 4
> mls cef maximum-routes ip-multicast 4
> 
> to get this split...
> 
> #show mls cef max
> FIB TCAM maximum routes :
> =======================
> Current :-
> -------
> IPv4 + MPLS         - 240k (default)
> IPV6                - 4k
> IP multicast        - 4k

	What I don't get is why the "router" has to reboot twice to take
these settings into account when you resize the tcam.  The 'pending reload'
that it enables isn't even visible in the "sh reload" command.

	- Jared


-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.