[c-nsp] LDP loop detection/prevention as per RFC 3036

[Alex]

Jeff,
Loop detection seems to have been implemented:
http://www.cisco.com/en/US/products/ps6017/products_command_reference_chapter09186a008087ddb7.html#wp1011067
Loop prevention seems to exist as well and relies on loop-free IGP - I
vaguely recall that if LSR receives a label binding from its neighbor and if
this binding does not correspond to a best route then this label binding is
ignored. In short, best route to a destination and label binding must have
the same nexthop.
Rgds
Alex

> ----- Original Message ----- 
> From: "Jeff Tantsura" <jeff.nsp at gmail.com>
> To: <cisco-nsp at puck.nether.net>
> Sent: Thursday, September 27, 2007 2:34 PM
> Subject: [c-nsp] LDP loop detection/prevention as per RFC 3036
>
>
>> Hi,
>>
>> Could someone from Cisco please clarify whether this has been 
>> implemented?
>>
>> Thanks in advance,
>> Jeff
>>
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>