[cisco-voip] fax with sccp ata on cme

[Boda György]

Hi,

Are you sure that Port 1 of the ATA doesn't support fax passthrough?
There is no reference to this in the documentation.

Gyorgy

-----Original Message-----
From: Jon Carnes [mailto:jonc at ftnc.net] 
Sent: 2005. március 2. 5:29
To: Giovanni Coriasco
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] fax with sccp ata on cme

On Tue, 2005-03-01 at 13:24, Giovanni Coriasco wrote:
> Hi, anyone has succesfully tried to send and receive faxes to and from

> ata 186 with sccp firmware, registered on a callmanager express?
> 
> The problem I'm encountering is that I can't hear fax tones when I 
> receive a fax call on the ata.
> 
> Thanks in advance.
> 
> Giovanni
> 
I have several ATA-186's working with Fax machines. We run them off port
2 of the ATA, as port 1 does not support Fax or modem - only voice.

I'm attaching to Vocal Data switch's instead of a switch running Call
Manager. The faxing works fine as long as we don't try to attach to a
remote Super G3 fax machine. The "Super G3" doesn't seem to tolerate
dropping down to 9600 baud (which is the fastest rate that an ATA-186
can handle).

Jon Carnes
FeatureTel

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


McAfee WebShield: OK.




McAfee WebShield: OK.