[cisco-voip] Calling Name (inbound and outbound) not working on3640 and NM-HDV-2MFT-T1 48, Facility IE

[William M. Sandiford]

Hello:

Just a quick note for all that were following this thread and that have helped out, I was able to get the problem totally solved.  I'm posting this for reference / archive purposes in case others have this problem in the future.

The problem was that my carrier (TELUS) passes the calling name as a Facility IE as opposed to a Display IE.  On my platform (3640), and most others I presume, calling name by facility IE was not supported until IOS 12.3(4)T so you will need that or later to make it work (I used 12.3(11)T3).  The following configuration items were required in addition to any other configs that you already have.

Under the serial interface for your T1, in my case int Serial3/0:23

Interface Serial3/0:23
 isdn supp-service name calling
 isdn outgoing ie facility
 no isdn outgoing display-ie
!

Thanks to everyone who pointed me in the right direction for all the help.

Regards,
Bill


-----Original Message-----
From: William M. Sandiford 
Sent: Tuesday, March 01, 2005 4:57 PM
To: Mark R. Lindsey; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Calling Name (inbound and outbound) not working on3640 and NM-HDV-2MFT-T1 48


Ok

So I finally got the calling name into the q931 trace as a facility message.  It turns out that Calling name as a facility IE message wasn't supported until 12.3(4)T so I had to upgrade to a newer version of IOS.  That being said.  Now I am seeing the calling name in the trace, but it still isn't making it into the sip message.

Any suggestions?

Bill


00:08:52: ISDN Se3/0:23 Q931: RX <- SETUP pd = 8  callref = 0x03C9 
        Bearer Capability i = 0x8090A2 
                Standard = CCITT 
                Transer Capability = Speech  
                Transfer Mode = Circuit 
                Transfer Rate = 64 kbit/s 
        Channel ID i = 0xA98381 
                Exclusive, Channel 1 
        Facility i = 0x9F8B0100A117020101020100800F43414E444E20444F4D41494E204E41 
                Protocol Profile =  Networking Extensions 
                0xA117020101020100800F43414E444E20444F4D41494E204E41 
                Component = Invoke component 
                        Invoke Id = 1 
                        Operation = CallingName 
                                Name presentation allowed
                                Name = THE NAME 
        Progress Ind i = 0x8283 - Origination address is non-ISDN  
        Calling Party Number i = 0x2183, 'XXXXXX6814' 
                Plan:ISDN, Type:National 
        Called Party Number i = 0xA1, 'XXXXXX2000' 
                Plan:ISDN, Type:National
00:08:52: ISDN Se3/0:23 Q931: TX -> CALL_PROC pd = 8  callref = 0x83C9 
        Channel ID i = 0xA98381 
                Exclusive, Channel 1
00:08:52: ISDN Se3/0:23 Q931: TX -> CONNECT pd = 8  callref = 0x83C9
00:08:52: ISDN Se3/0:23 Q931: RX <- CONNECT_ACK pd = 8  callref = 0x03C9
00:08:56: ISDN Se3/0:23 Q931: RX <- DISCONNECT pd = 8  callref = 0x03C9 
        Cause i = 0x8090 - Normal call clearing
00:08:56: ISDN Se3/0:23 Q931: TX -> RELEASE pd = 8  callref = 0x83C9
00:08:57: ISDN Se3/0:23 Q931: RX <- RELEASE_COMP pd = 8  callref = 0x03C



-----Original Message-----
From: Mark R. Lindsey [mailto:lindsey at e-c-group.com] 
Sent: Tuesday, March 01, 2005 11:29 AM
To: William M. Sandiford
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Calling Name (inbound and outbound) not working on 3640 and NM-HDV-2MFT-T1 48


On Mar 1, 2005, at 11:20 AM, William M. Sandiford wrote:

> So it looks like I'm going to have to go off of mainline and on to T 
> in order to get this to work?

I think so. But even in those, we've helped Cisco identify some issues 
--

CSceg80858 -- Remote-Party-ID is formatted wrong/oddly in current 
releases (to be addressed in 12.4)

CSCsa67646 -- SIP "486 Busy Here" messages aren't returned on some 
SIP-PSTN calls

---
Mark R. Lindsey, ECG
+1-229-316-0013 lindsey at e-c-group.com


-- 
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.5.4 - Release Date: 3/1/2005
 

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.5.4 - Release Date: 3/1/2005
 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip

-- 
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.5.4 - Release Date: 3/1/2005
 

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.5.4 - Release Date: 3/1/2005