[cisco-voip] How to configure message button on 7940 MGCP phone

[Jon Carnes]

On Wed, 2005-03-02 at 10:56, gc wrote:
> We use non-cisco softswitch and voicemail system. How can I configure
> the message button on cisco 7940 mgcp phone to point to our VM system.
> So when user press the message button, it will connect to our
> voicemail system.
>  
> Gary

Try the VoIP wiki. There is lots of documentation on how to use Cisco
phones in various situations. There is documentation on lighting/using
the VM button with Asterisk

http://www.voip-info.org/wiki-cisco+79xx

Good Luck

Jon Carnes
FeatureTel